Machines taller or wider than the door need high-cube, open-top or flat-rack containers. Exact figures vary slightly by container maker, so confirm with your forwarder. CISH supplies, installs and commissions complete production lines and plans the container loading with the factory.

20ft container dimensions at a glance

MeasureTypical value (standard 20ft)
Internal lengthAbout 5.87 m
Internal widthAbout 2.33 m
Internal heightAbout 2.35 m
Door opening widthAbout 2.29 m
Door opening heightAbout 2.26 m
Internal volumeAbout 33.1 m³
Common maximum gross weight30,480 kg
Empty (tare) weightAbout 2,200 kg
Common net loadAbout 28,280 kg

The ISO standard allows a higher maximum gross mass of 36,000 kg for newer containers, but many boxes in service are rated lower. Always check the plate on the container door and the road limits for the delivery leg.

20ft, 40ft or 40ft high cube?

20ft standard40ft standard40ft high cube
Internal lengthAbout 5.87 mAbout 12.0 mAbout 12.0 m
Internal heightAbout 2.35 mAbout 2.35 mAbout 30 cm more than standard
Internal volumeAbout 33.1 m³About 67.5 m³About 75.3 m³
Tare weightAbout 2,200 kgAbout 3,800 kgSlightly more than 40ft standard
Common net loadAbout 28,280 kgAbout 26,680 kgSimilar to 40ft standard
Best forHeavy, compact machinesBulky lines and long partsTall machines and cabinets
Sea freight China to Durban (Aug 2026)About US$2,100–3,300About US$2,500–3,800Usually close to 40ft

A 40ft costs only somewhat more than a 20ft but holds twice the volume, which is why it is the default box for most machinery. Use a 20ft when the cargo is heavy for its size, such as presses, extruders or gearboxes.

When machinery does not fit

Container typeUse it when
Open topThe machine is too tall for the door or must be loaded by crane from above
Flat rackThe machine is wider or taller than any box, such as large frames, tanks or dryers
PlatformVery large or heavy items lashed on a flat base
Break bulkItems too large even for flat racks, shipped as separate cargo

Open tops and flat racks cost more and are in shorter supply than standard boxes, so book them early. Ask the factory to design large machines in sections that fit standard boxes where possible.

Reading the container plate

Every container carries a safety approval plate on its door. It shows the maximum gross mass, the tare weight and the maximum payload for that box. Use those figures, not a general table, when the load is close to the limit. The tare also matters for road transport, because the truck carries the container as well as your machines.

Since 2016, shippers have also had to declare a verified gross mass for each container before it is loaded onto a ship. Your forwarder or the factory normally arranges the weighing in China, but you should check that the figure matches the packing list, because large differences raise questions at the port.

How many containers does a production line need?

There is no fixed answer, because it depends on the size of the machines, how they are crated and how much can be broken down. As a rough guide, a compact food or packaging line often fits in one or two 40ft containers, while lines with silos, dryers, long conveyors or tall frames can need several containers plus flat racks.

Ask the factory for a container plan before you sign the contract, not after the line is built. A plan shows each crate, its dimensions and weight, and which box it goes in. It lets you compare freight quotes on the same basis, budget the inland transport, and spot items that need special containers early enough to book them.

How to plan a container load for machinery

  1. Get dimensions and weights for every crated item from the factory, including packing.
  2. Check the door opening, not only the internal size; a machine that fits inside may not pass through the door.
  3. Check weight distribution so heavy items sit over the floor's strongest parts and the load is balanced.
  4. Plan lashing and blocking to stop movement at sea.
  5. Protect from moisture with desiccants and wrapping for electrical cabinets and machined surfaces.
  6. Label crates by installation order and make a packing list for each container.
  7. Photograph the loading for insurance and for the installation team.

Weight and the road leg in South Africa

At sea, containers carry close to their rated gross weight. On the road from the port to your site, legal axle and vehicle limits may be lower, and very heavy or oversized loads need abnormal load permits and escorts. Ask your transporter to check the delivery weight and route before the container is packed, especially for 20ft boxes loaded close to their maximum.

Worked example: packing a small production line

An illustration only:

ItemAssumption
LineMixing, forming, cooling and packing machines, plus control cabinets and tooling
Heaviest itemsTwo machines of several tonnes each
PlanHeavy machines in a 20ft; conveyors, cabinets and tooling in a 40ft high cube
Oversized itemOne dryer section on a flat rack
BenefitWeight in the small box, volume in the big one, and fewer boxes overall

Common mistakes

  • Using internal size but ignoring the door.
  • Overloading a 20ft. The box may pass at sea but fail on the road.
  • No lashing plan. Machines shift and arrive damaged.
  • Mixing installation order. The first machine needed is at the back of the last box.
  • Forgetting moisture. Condensation damages electrics on a month-long voyage.

Where CISH fits

CISH supplies, installs and commissions complete production lines from audited factories in China, and plans the container load with the factory: dimensions and weights for each crate, the right mix of 20ft, 40ft, high-cube and special containers, lashing, moisture protection and packing lists in installation order.

Frequently asked questions

What are the internal dimensions of a 20ft container?

Typically about 5.87 m long, 2.33 m wide and 2.35 m high, with a door opening of about 2.29 m by 2.26 m. Figures vary slightly by manufacturer.

How much weight can a 20ft container carry?

A common rating is 30,480 kg gross, so with a tare of about 2,200 kg it carries roughly 28 tonnes of cargo. Road limits on the delivery leg may be lower.

How many cubic metres is a 20ft container?

About 33 m³. A 40ft standard holds about 67.5 m³ and a 40ft high cube about 75 m³.

Should I ship machinery in a 20ft or 40ft?

Use 20ft boxes for heavy, compact machines and 40ft boxes for bulky lines. The 40ft costs only somewhat more but holds about twice the volume.

What if my machine does not fit through the door?

Use an open-top container, a flat rack or, for very large items, break bulk shipping. Book special containers early.

What does it cost to ship a 20ft container from China to South Africa?

As of August 2026, typically about US$2,100–3,300 from China's main ports to Durban, before origin, destination and clearing charges.

What is a verified gross mass?

The confirmed total weight of a packed container, which shippers must declare before it is loaded onto a ship. The factory or forwarder usually arranges the weighing at origin; check that it matches your packing list.

Can tooling and consumables ship with the machines?

Yes, and it is usually best to pack them in clearly labelled crates in the same containers, listed on the packing list, so they arrive with the line and clear on the same declaration.