The 140th session's first phase ran from 15 to 19 October 2026; spring sessions run from mid-April to early May, so the 141st session falls in spring 2027 (confirm phase dates on the official site). Use the fair to collect quotes and contacts, then audit the two or three best factories before you pay.
What the Canton Fair is, and is not
| It is | It is not |
|---|---|
| China's largest general trade fair, held in Guangzhou every spring and autumn | A machinery-only show |
| A place to meet many suppliers of one product in a few days | Proof that a stand belongs to the factory that builds the machine |
| A source of indicative prices and catalogues | A place to sign a final contract for a line |
| A starting point for factory visits nearby | A substitute for an audit and a factory acceptance test |
Which phase to attend
The fair is split into three phases of about five days each, with different product groups in each. Machinery, industrial automation, power equipment and general mechanical products are concentrated in the first phase. If you are sourcing a production line, plan your trip around Phase 1, and check the organiser's floor plan for the halls covering your equipment.
| Session | Dates | Note |
|---|---|---|
| 140th session, Phase 1 (autumn 2026) | 15–19 October 2026 | Already held |
| 141st session (spring 2027) | Mid-April to early May 2027 | Phase dates to confirm on the official site |
Before you go: preparation that saves the trip
- Write a one-page specification: product, output per hour or day, raw material, pack, power supply (South African 400 V three-phase, 50 Hz), and site size.
- List the complete line, from raw material to packed product, so you can tell which stands sell only part of it.
- Pre-register on the official site and book flights and hotels early; Guangzhou fills up during the fair.
- Check visa requirements with the Chinese embassy well in advance.
- Set a target list of 10–20 exhibitors from the online catalogue, and leave time for walking the halls.
- Plan factory visits for the days after your phase, while you are in the region.
At the fair: how to judge an exhibitor
- Ask whether they are the manufacturer. Request the factory address and ask if you may visit in the next few days. Trading companies are common; they are not always bad, but you need to know.
- Ask for references in Africa, ideally in South Africa or a neighbouring country, running the same line.
- Ask what the price includes. Many stand prices are for the main machine only, ex-works, without auxiliaries, installation or commissioning.
- Check the electrical standard. Machines for China run on 380 V; South Africa uses 400 V at 50 Hz, and control voltages and plug standards differ.
- Take photos and catalogues and note each conversation; after three days, stands blur together.
- Do not pay a deposit at the fair.
After the fair: from shortlist to contract
- Compare quotes on the same scope: add what each leaves out; our same-scope method explains it.
- Visit the two or three best factories, and run our supplier audit checklist.
- Agree the specification and acceptance tests in writing: output on your product, electrical standard, materials.
- Negotiate payment against milestones, not a large deposit up front; see how to pay a Chinese supplier safely.
- Attend or appoint someone to attend the factory acceptance test before shipment.
- Arrange shipping, clearance and installation, and plan commissioning and training.
What a Canton Fair purchase costs beyond the machine
| Cost | Typical position | Note |
|---|---|---|
| Travel and accommodation | Your budget | Fair-time hotel prices are higher |
| Factory audit and visits | Your time or an agent's fee | Worth it before any deposit |
| Freight to Durban | Varies by container and season | Sea transit China to Durban typically about 22–30 days |
| Duty | Usually free for production machinery | Check headings; some items carry 10–20% |
| Import VAT | 15% on FOB value × 1.10 + duty | Claimable by VAT vendors |
| Installation and commissioning | Often not in the stand price | Agree who does it before signing |
| Training and spares | Often not in the stand price | Write them into the contract |
South Africa values imports on the FOB price for customs, so the factory's FOB quote is the base for VAT. If you buy any used or demonstration equipment at the fair, it needs an ITAC import permit before shipment.
A practical plan for Phase 1
| Day | What to do |
|---|---|
| Day before | Collect your badge; walk the halls for your equipment group to see where your target exhibitors are |
| Days 1–2 | Visit your target list; collect quotes on your specification; note which stands are factories |
| Day 3 | Walk the rest of your halls for exhibitors you did not know; second conversations with the best |
| Days 4–5 | Narrow to five or six; ask each for a factory visit in the following week |
| Following week | Visit two or three factories in Guangdong or neighbouring provinces; see machines being built and tested |
| Back home | Compare quotes on the same scope; ask for revised offers; plan the audit and acceptance tests |
Keep a simple record for every stand: company name on the business licence, factory address, what the quote includes, and a photo of the machine. It is the only way to compare twenty conversations a week later.
Common mistakes at the Canton Fair
- Buying the cheapest stand price. It is usually the most incomplete scope.
- Signing at the fair. Prices and terms improve after visits, not on the stand.
- Skipping the factory visit. The stand tells you nothing about the workshop.
- Ignoring the electrical standard. Rewiring on site costs time and money.
- No plan for installation. A line in crates is not a line.
Choosing help for the trip
If you use a sourcing agent or a turnkey partner, check that they:
- Have bought your type of line before and can show references.
- Disclose how they are paid, by you, by the factory, or both.
- Will attend factory audits and acceptance tests.
- Can take responsibility for shipping, clearance, installation and commissioning, or tell you clearly who will.
Where CISH fits
CISH sources complete production lines from factories we have audited in China, specifies them against your product and site, and ships, clears, installs and commissions them in South Africa with your team trained. If you have met suppliers at the Canton Fair, we can check their quotes against what a complete line should include, audit the factory and take the project from there.
Frequently asked questions
When is the next Canton Fair?
The 141st session takes place in spring 2027 in Guangzhou; spring sessions run from mid-April to early May in three phases. Confirm the phase dates on the organiser's official site before booking.
Which phase of the Canton Fair is for machinery?
Machinery, industrial automation, power equipment and general mechanical products are concentrated in the first phase.
Is the Canton Fair worth it for buying a production line?
Yes, as a way to meet many suppliers quickly and collect quotes. It is not a place to decide: visit and audit the best factories afterwards, and agree acceptance tests before paying.
How do I know if an exhibitor is a factory?
Ask for the factory address and permission to visit within a few days, check the business licence, and look for the same products being built in the workshop.
Is there import duty on machinery bought at the Canton Fair?
Most production machinery is free of general duty in SARS's 2026 tariff, but import VAT of 15% applies and some items such as separate motors or hydraulic presses carry duty.
Can CISH help after the Canton Fair?
Yes. We can check exhibitors' quotes against a complete line, audit the factory, and supply, install and commission the line.