For a single product or spare parts it means counting, measuring and checking against the order; for machinery it should confirm that what is being packed is the machine you accepted at the factory acceptance test, complete with every part, manual and spare in the contract, correctly labelled, protected and packed for sea freight. Hold back a balance until both are done. Used equipment for South Africa also needs an ITAC permit before shipment, and some neighbouring countries require their own pre-shipment conformity certificates. CISH runs FATs and pre-shipment checks on every line it supplies.

Three different checks: factory test, pre-shipment and site test

CheckWhereWhenWhat it proves
Factory acceptance test (FAT)Supplier's factoryWhen the machine is built, before packingThe machine runs to the agreed output and quality on your product or a test material
Pre-shipment inspection (PSI)Supplier's factory or warehouseWhen goods are packed for shipmentThe accepted machine, parts, spares and documents are all there, correctly marked and packed
Site acceptance test (SAT)Your factoryAfter installation and commissioningThe line runs to the agreed output in your conditions

Our FAT checklist and the guide to FAT vs SAT cover the other two. The PSI closes the gap between them.

What a pre-shipment inspection should check

1. Identity and completeness

  • Serial numbers and nameplates match the FAT record and the contract.
  • Every item on the packing list is present: machines, motors, control cabinets, conveyors, moulds, change parts, tools.
  • Spare parts listed in the contract, in the agreed quantities.
  • Documents: manuals, electrical drawings, parts lists, PLC programme backups, test certificates, in English.

2. Condition

  • No damage to paint, guards, panels, screens, sensors and wiring.
  • Rust protection on machined surfaces and shafts.
  • Loose parts secured and fragile items packed separately.

3. Specification

  • Voltage and frequency: 400 V, 50 Hz three-phase for South Africa, and the plug and wiring standards agreed.
  • Materials: stainless steel grades for food contact parts, as specified.
  • Changes after the FAT: any fixes agreed at the FAT have been made.

4. Packing and marking

  • Export packing: wooden cases with fumigated or heat-treated timber marked to ISPM 15, moisture barrier and desiccant.
  • Lifting points and centre of gravity marked on heavy cases.
  • Case marks and numbers matching the packing list.
  • Container loading plan: what goes into which container, and how it is secured.

5. Photographs and report

  • Photographs of each item, nameplate and case before closing.
  • A written report with pass or fail on each point, signed by the inspector.

What an inspection costs

For consumer goods in China, independent inspection firms publish rates of roughly US$200–350 per inspector-day, sometimes including travel within a set distance of their offices. For machinery, the inspector needs to understand the equipment and spend longer on documents and parts, so plan several inspector-days, or an engineer from your supplier of choice, for a complete line. Compare quotes on what is included: travel, weekend work, reports, photographs and re-inspection if the first one fails.

When to pay the balance

A common payment structure is a deposit at order, a further payment after a successful FAT, and the balance after a successful PSI and before or against shipping documents. Write the PSI into the contract as a condition for the balance, and say who chooses and pays the inspector. Our guide to paying a Chinese supplier safely explains the options, including letters of credit where the inspection certificate can be one of the documents required for payment.

Customs and conformity requirements

  • South Africa: SARS values imports on an FOB basis for duty. The commercial invoice, packing list and bill of lading must agree with what the PSI saw. Used or second-hand machinery needs an ITAC import permit before shipment.
  • Exports to neighbours: if the line goes on to Zimbabwe, regulated goods need a Consignment Based Conformity Assessment certificate arranged before loading; Kenya requires a Certificate of Conformity under its PVoC programme, and from 1 March 2026 shipments without one face destination inspection at 5% of the customs value. Plan these inspections together with your PSI.

Choosing an inspector

  • Accredited inspection bodies (look for ISO/IEC 17020 accreditation through a body such as SANAS or its counterparts) for formal certificates.
  • Specialist machinery inspectors or engineers for complex lines.
  • Your own engineer if you have one; the most reliable but the most expensive in travel.

Whoever goes must have the contract, the technical specification, the FAT report and the packing list in hand.

Worked example: a bottling line

A water bottler in Gauteng buys a 2,000 bottles-an-hour line with a blower, monoblock, labeller and shrink wrapper. The FAT shows the line running on the buyer's preforms. Two weeks later the PSI finds the labeller has the wrong change parts for the 1.5 L bottle, two spare servo drives are missing, and the electrical drawings are only in Chinese. The supplier fixes all three before packing, and the buyer releases the balance against the signed PSI report and shipping documents. The steps are illustrative.

From a delivered project: A South African food manufacturer that ordered a packaging-line upgrade of about US$420,000 direct from a Chinese factory found two non-compliant subassemblies and a controls package that did not match the contract at the FAT video walk-through; renegotiated milestones protected the deposit and the line reached SAT three months later. Read the FAT rescue case study.

Common mistakes

  • Skipping the PSI because the FAT passed.
  • No packing list for the inspector to check against.
  • Paying the balance before inspection.
  • Accepting Chinese-only documentation.
  • Forgetting ITAC permits for used machines.

Documents to give the inspector

Send the inspector the contract and technical specification, the FAT report with any open points, the full packing list with case numbers, the spare parts list, the list of documents to be supplied, photographs of the accepted machine, and your packing and marking instructions. Without these, an inspector can only check what the supplier shows them.

If the inspection fails

Agree in the contract what happens if the inspection fails: the supplier corrects the faults at its cost, a re-inspection is booked, and who pays for it. Do not release the balance, and do not let goods be loaded, until the faults are closed and photographed. Small issues, such as a missing manual, can be accepted with a written undertaking, but missing parts and damage should be fixed before shipping, because they are much harder to resolve once the goods are at sea.

Where CISH fits

On every line CISH supplies, we run the factory acceptance test on your product and a pre-shipment check of parts, spares, documents and packing before the balance is due, ship and clear the line, install and commission it, and run the site acceptance test with your team. If you have bought direct, we can advise on what your inspection should cover.

Frequently asked questions

What is a pre-shipment inspection?

A final check in China, before shipping and before the balance is paid, that the goods are complete, correct, undamaged and properly packed.

How much does a pre-shipment inspection cost in China?

Published rates are roughly US$200–350 per inspector-day for standard goods. Machinery usually needs more days or an engineer.

Is a pre-shipment inspection the same as a factory acceptance test?

No. The FAT proves the machine works; the PSI confirms the accepted machine, parts and documents are packed and shipped.

When should I pay the balance?

After a successful FAT and PSI, and before or against shipping documents, as agreed in the contract.

Do I need an inspection for used machinery?

Yes, and used machinery for South Africa also needs an ITAC import permit before shipment.

Does CISH inspect lines before shipping?

Yes. Every CISH line has a factory acceptance test and a pre-shipment check before the balance is due.