To compare honestly, work out the energy each needs per tonne: as an example, a 15 kW mill grinding about a tonne an hour uses roughly 15 kWh of electricity per tonne, or roughly 4–5 litres of diesel per tonne from an engine giving the same power, then multiply by your tariff and your diesel price and add maintenance. Eskom's standard tariff rose 8.76% for 2026/27 and fuel prices change monthly, so recalculate every year. Solar with batteries, or grid with diesel backup, often gives the lowest cost and the most milling hours. Both kinds of mill make unsifted meal and feed; graded super and special meal needs a roller plant. CISH supplies, installs and commissions complete maize milling plants on grid or diesel power.

The short answer

Electric hammer millDiesel hammer mill
Energy cost per tonneUsually lowerUsually higher
MaintenanceMotor bearings, belts, starterOil, filters, injectors, overhauls, plus belts
NeedsThree-phase supply sized for starting currentFuel supply and storage
OutagesStops when the grid failsKeeps running
Noise and fumesQuiet, no fumesNoisy, exhaust
Best forTowns and farms with good supplyRemote sites, weak grid, backup

How to work out cost per tonne (example)

Use your own figures; the ones below show the method.

Electric: motor power × hours per tonne × tariff per kWh. As an example, a 15 kW motor running one hour per tonne uses about 15 kWh per tonne. Multiply by your all-in tariff per kWh, including demand or network charges on your bill.

Diesel: an engine typically uses roughly 0.25–0.3 litres of diesel per kWh of work it delivers. Delivering the same 15 kW for an hour needs roughly 4–5 litres per tonne. Multiply by your diesel price.

Then add maintenance: for electric, belts and bearings; for diesel, oil and filter changes every few hundred hours, injector service and eventual overhaul. Divide yearly maintenance by yearly tonnes.

In most South African cases, the electric figure is a fraction of the diesel figure. The gap narrows where the electricity tariff is high and the mill runs few hours, because fixed charges on the bill are spread over fewer tonnes.

Power supply: check before you choose

An electric hammer mill needs a supply strong enough for its starting current, often several times the running current. Many rural sites have single-phase or weak supplies that cannot start a large motor. Ask your municipality or Eskom what capacity is available and what an upgrade would cost before you buy an electric mill. Soft starters or star-delta starters reduce starting current.

Outages and backup

Where the grid is interrupted, an electric mill stops. Options:

  • Diesel backup engine on the same mill, switched by belt or clutch.
  • Generator sized for the motor's starting current.
  • Solar with batteries sized for the motor and hours of milling.
  • Mill outside outage hours where schedules are known.

Our guide to protecting a line from load shedding compares backup options.

Solar hammer mills

Solar-powered mills use panels and batteries to run an electric motor. Upfront cost is higher, but energy cost per tonne is very low once installed. They suit off-grid sites with sun and daytime milling. Size the panels and batteries for the motor's running and starting power and for the hours you mill, and protect the panels.

Meal and feed: same machine, same limits

Diesel and electric hammer mills grind the same way, and both make unsifted maize meal and animal feed. Neither can make super or special maize meal, which under GN R.63 of 2016 must meet fat and fibre limits that need degerming and roller milling. Our hammer mill vs roller mill guide explains the difference.

Safety

Hammer mills are driven machinery under the Driven Machinery Regulations: guard belts and pulleys, fit emergency stops, and train operators. Diesel engines add fuel storage, exhaust and noise risks; keep fuel away from the mill house and ventilate the engine.

Worked example: a rural mill in the Eastern Cape

A service mill at a rural village runs a diesel engine because the site has only single-phase power. The owner works out that diesel costs several times what electricity would per tonne. He asks for a three-phase connection, which takes months, and in the meantime installs a solar system with batteries sized to run a 7.5 kW mill for six hours a day. The diesel engine stays as backup for cloudy weeks. Running costs fall sharply, and customers no longer wait for diesel deliveries. The figures are illustrative.

When to move up to a plant

If customers ask for graded meal in branded bags, or volumes reach tens of tonnes a day, the question changes from diesel or electric to a complete roller plant. A complete maize mill of about 30 tonnes a day costs about US$250,000–400,000 as an indication for 2026, and needs a strong three-phase supply and a backup plan. Our maize mill sizing guide shows what each size needs.

Five questions before you buy

  1. Is three-phase power available, and is it strong enough to start the motor?
  2. What is your all-in electricity tariff and your diesel price?
  3. How many hours a day and tonnes a year will the mill run?
  4. How often does the grid fail at your site?
  5. Who will service the motor or engine locally?

Common mistakes

  • Comparing purchase price only.
  • An electric mill on a weak supply that cannot start it.
  • No backup where outages are common.
  • Ignoring diesel maintenance in the cost per tonne.
  • Expecting a hammer mill to make graded meal.

Maintenance and operating costs side by side

Diesel mills need engine services, oil and filter changes, fuel storage and a mechanic who knows the engine; electric mills need little more than motor bearings, belts and a good starter panel. Both need hammers turned and replaced and screens changed as they wear, and both need a clean intake to keep stones and metal out, ideally with a magnet. Write down your expected running hours, then compare a year of diesel, services and engine parts with a year of electricity, including any demand charge on your tariff. Where grid power is reliable, electric usually costs less to run and maintain; where outages are long or there is no grid, diesel or an electric mill with a generator is the practical choice.

A middle option is an electric mill with a solar system and battery for part of the load, or a generator kept for outages only.

Where CISH fits

For a single hammer mill, a local supplier is usually the better buy, and we will say so. When the business grows into graded meal, CISH supplies complete maize milling plants, cleaning, degerming, roller milling, sifting and packing, from audited factories in China, with the power and backup planned together, ships, clears, installs and commissions them, and trains your miller.

Frequently asked questions

Is a diesel or electric hammer mill cheaper to run?

Electric is usually cheaper per tonne where a reliable three-phase supply exists; diesel costs more in fuel and maintenance.

How much electricity does a hammer mill use?

As an example, a 15 kW mill grinding about a tonne an hour uses roughly 15 kWh per tonne.

How much diesel does a hammer mill use?

As an example, roughly 4–5 litres per tonne for an engine delivering about 15 kW for an hour.

Can I run an electric mill during load shedding?

Only with backup: a generator, a diesel engine on the mill, or solar with batteries.

Is a solar hammer mill worth it?

Often, off-grid or where diesel is expensive, if panels and batteries are sized for the motor and milling hours.

Does CISH sell hammer mills?

No. We supply complete milling plants. For a hammer mill, a local supplier is usually better.