Under section 8 of the OHS Act, the employer must provide and maintain plant and systems of work that are safe, as far as reasonably practicable. Under section 10, anyone who designs, manufactures, imports, sells or supplies an article for use at work must ensure it is safe when properly used, and anyone who erects or installs it must make sure it is installed safely. The Driven Machinery Regulations, 2015 set specific rules: moving parts must be guarded, mixers must stop when guards open, hand-fed presses and guillotines need two-hand controls and anti-repeat devices, roll nips need guards or trip devices, and lifting machines must be marked with their safe working load and examined and tested by a lifting machinery inspector before use and at least every 12 months. Electrical installations need a certificate of compliance. CISH supplies, installs and commissions production lines built and documented to these rules.

Regulations change. Confirm the current requirement with the authority named in each section before you commit money.

What "registering a factory" means in practice

WhatWith whomNotes
CompanyCIPCBefore you contract and employ
Employer for compensationCompensation Fund (COIDA)Required for every employer
UIFDepartment of Employment and LabourEvery employer with employees
Tax, PAYE, VATSARSVAT above the threshold
Zoning and building plansMunicipalityBefore you build or change use
Sector licencesVariesFor example a Certificate of Acceptability for food, emission licences for listed activities
Machinery safetyYour own systems, inspected by the DepartmentOHS Act and its regulations

Some installations need notification or registration of their own, such as major hazard installations and certain pressure equipment. Check which apply to your plant.

Authority: Department of Employment and Labour (OHS Act, COIDA, UIF), with municipal and sector authorities.

COIDA: register as an employer

Section 80 of COIDA requires every employer carrying on business to register with the Compensation Commissioner within the prescribed period, giving the particulars required. The Compensation Fund's guidance is that you register within seven days of employing your first worker. You then submit annual returns of earnings and pay assessments. Without registration, injured workers' claims and the costs that follow become your problem, and a letter of good standing is often needed for tenders and large customers.

Authority: Compensation Fund, Department of Employment and Labour.

OHS Act: the duties that apply to machinery

  • Section 8, the employer: provide and maintain a working environment, plant and systems of work that are safe and without risk to health, as far as reasonably practicable; identify hazards, take measures, and provide information, training and supervision.
  • Section 10, designers, manufacturers, importers and suppliers: ensure articles for use at work are safe and without risk when properly used and meet prescribed requirements.
  • Section 10, installers: anyone who erects or installs an article for use at work must ensure nothing about the way it is installed makes it unsafe.

An imported line therefore puts duties on the importer and the installer as well as on you as the employer and user. Put responsibilities in the contract.

Authority: Department of Employment and Labour, inspectorate.

The Driven Machinery Regulations, 2015: what they require

The regulations apply to the design, manufacture, operation, repair, modification, maintenance, inspection, testing and commissioning of driven machinery. The main rules for a production line:

  • Revolving parts (regulation 3): shafts, pulleys, gears, couplings, belts, chains and similar parts must be securely fenced or guarded unless they are as safe by position or construction.
  • Presses, shears and guillotines (regulation 10): hand-fed machines need controls that keep hands out of the danger zone, such as two-hand controls that cannot be bypassed, and full-revolution clutch machines need anti-repeat devices.
  • Slitting machines (regulation 11): guarded cutting edges, fixed guarding and interlocked access points.
  • Mixers and agitators (regulation 12): dangerous moving parts must be out of reach behind doors, covers or guards, and where practicable the machine must not start unless they are closed and must stop if one is opened.
  • Rolls and calenders (regulation 13): in-running nips less than 75 mm apart need a fixed guard, or a trip bar, cable or sensing device within 300 mm of the nip that stops or reverses the rolls.
  • Lifting machines (regulation 18): cranes, hoists and similar machines must be built to a recognised standard, marked with their safe working load, fitted with brakes or holding devices, and examined and performance-tested by a lifting machinery inspector of a registered lifting machinery entity before use, whenever re-erected, and at intervals not exceeding 12 months.

The regulations also cover circular saws, woodworking machines, sanding machines, washing machines, compressors and refrigeration plant. Contraventions can bring fines or imprisonment of up to 12 months.

Authority: Department of Employment and Labour.

Electrical installations and pressure equipment

  • Electrical: every electrical installation needs a certificate of compliance issued by a registered electrical contractor, under the Electrical Installation Regulations made under the OHS Act. A new line connected to your distribution board is part of the installation. Keep the certificate on file.
  • Pressure equipment: boilers, air receivers and other pressure vessels fall under the Pressure Equipment Regulations, with design, marking, inspection and record requirements.

Authority: Department of Employment and Labour; accredited inspection authorities for pressure equipment.

What to ask of an imported machine

Machines built for other markets may not meet these rules as delivered. Before shipment, check:

  • Guards on every belt, chain, coupling and gear, fixed or interlocked.
  • Interlocks on doors and covers of mixers, cutters and fillers that stop motion when opened.
  • Two-hand controls and anti-repeat on hand-fed presses and guillotines.
  • Emergency stops within reach of operators along the line.
  • Lifting equipment marked with its safe working load and documented to its design standard.
  • Electrical panels built to standards your electrician can certify, with isolation points.
  • Manuals and labels in English, including safe operating and maintenance procedures.

A factory acceptance test before shipment is the place to check these, and a site acceptance test after installation confirms them on your floor.

Risk assessment, training and records

The OHS Act expects you to identify hazards and reduce risks. For each machine, carry out a risk assessment, write safe operating procedures, train operators and keep training records, appoint competent people for inspection and maintenance, and keep inspection records for lifting equipment and pressure vessels. Lockout of energy before maintenance is standard practice and part of a safe system of work. Inspectors and insurers will ask for these records.

Worked example: a new bakery line

A bakery in Pietermaritzburg installs an imported line with a dough mixer, a divider, a moulder and an overhead hoist for flour bags. The supplier fits interlocks on the mixer bowl guard so the mixer stops when it opens, guards on all chains and belts, and emergency stops along the line. The hoist is marked with its safe working load and examined by a lifting machinery inspector before use. A registered electrician issues a certificate of compliance, and the bakery registers its new employees with the Compensation Fund and trains operators before production. The figures and names are illustrative.

Common mistakes

  • Assuming there is a factory licence and missing COIDA registration.
  • Removing interlocks to speed up production.
  • No lifting machinery inspection for hoists and cranes.
  • No electrical certificate of compliance for new machines.
  • No risk assessments or training records.

Where CISH fits

CISH supplies, installs and commissions production lines specified with the guarding, interlocks, emergency stops and documentation these rules call for, from audited factories in China. We check them at the factory acceptance test and again at commissioning on your floor, train your team, and hand over manuals and records. Employer registrations, risk assessments and ongoing compliance stay with you as the employer.

Frequently asked questions

Do I need to register a factory with the Department of Labour?

There is no general factory licence under the OHS Act; you must register as an employer with the Compensation Fund and UIF, and meet the OHS Act and its regulations.

When must I register with the Compensation Fund?

COIDA requires registration within the prescribed period; the Fund's guidance is within seven days of employing your first worker.

What do the Driven Machinery Regulations require?

Guarding of moving parts, interlocks on mixers, two-hand controls on hand-fed presses, nip guards on rolls, and inspection of lifting machines.

How often must lifting machines be inspected?

Before use, whenever re-erected, and at intervals not exceeding 12 months, by a lifting machinery inspector.

Who is responsible for a safe imported machine?

Under section 10 of the OHS Act, designers, manufacturers, importers and suppliers must ensure it is safe, installers must install it safely, and the employer must use it safely.

Does CISH supply lines that meet these rules?

Yes, with guarding, interlocks and documentation checked at acceptance tests and commissioning.