The label must be in English, and where possible another official language, and must show the name of the food on the main panel in letters at least 4 mm high, the name and address of the manufacturer, importer or seller, the ingredients list, common allergens, any special storage conditions, the net contents in SI units, the country of origin, a batch number and a date marking preceded by "best before", "use by" or "sell by". Most other mandatory text must be at least 1 mm high for lower-case vowels. Nutritional information in the prescribed table becomes compulsory when you make a nutrition claim. These rules decide what your coders and labellers must print on every pack.
Regulations change. Confirm the current requirement with the authority named in each section before you commit money.
What must be on a South African food label
| Item | What R146 requires |
|---|---|
| Language | English, and where possible at least one other official language; clear, legible and indelible |
| Name of the food | On the main panel, with a description if the name alone does not describe it; letters at least 4 mm high |
| Name and address | Of the manufacturer, importer or seller; for imported food, the manufacturer's name and address |
| Ingredients | In the format the regulations set, generally in descending order of mass |
| Common allergens | Declared in the ingredients list or in a "Contains:" statement close to it |
| Net contents | In SI units, as legal metrology rules require |
| Country of origin | "Product of", "Produced in", "Made in" or similar, with "Packed in" allowed in addition |
| Batch number | So that each batch can be identified and traced |
| Date marking | Preceded by "best before", "use by" and/or "sell by"; only "BB" may be abbreviated |
| Storage instructions | Where applicable, in bold upper-case letters at least 3.0 mm high |
| Instructions for use | Where the food would be hard to use without them |
| Nutritional information | Compulsory when a nutrition claim is made; in the prescribed table |
The authority for food labelling is the Department of Health, with enforcement largely through municipal environmental health practitioners. Net quantity rules sit under the Legal Metrology Act, administered by the National Regulator for Compulsory Specifications.
Letter sizes
The name of the food must appear on the main panel in letters at least 4 mm high, unless the regulations allow smaller lettering. Most other information required on the label must be in letters at least 1 mm high, measured on lower-case vowels. These sizes apply to packs whose main panel exceeds 12,000 mm²; smaller packs follow a table of reduced sizes. Storage instructions such as "Keep refrigerated" must be in bold upper-case letters at least 3.0 mm high. Check your artwork at actual size before printing.
Country of origin
R146 sets the wording:
- "Product of [country]" when all the main ingredients, processing and labour come from one country.
- "Produced in", "Processed in", "Manufactured in", "Made in" [country] or similar when food is processed in a second country in a way that changes its nature.
- "Packed in [country]" may be added to either.
A food made in South Africa from imported ingredients usually uses "Made in South Africa" or similar rather than "Product of South Africa".
Batch numbers and date marking
Every container must carry a batch number that makes the batch identifiable and traceable. Food must carry a date marking, except products listed in the regulations' exemptions annexure. The date must be preceded by the appropriate words "best before", "use by" or "sell by", written out in full; the only abbreviation allowed is "BB" for best before. Nobody may remove or change the date marking. Where several items are packed in an outer wrapper that will be thrown away, the date must appear on the packaging the consumer keeps.
For a factory, this means:
- A coder on every line that prints batch and date on each pack, and a system that changes them correctly at each batch and each day.
- Checks during the shift that codes are present, correct and legible.
- Records linking each batch number to raw materials, production time and dispatch.
Ingredients and allergens
The ingredients list follows the format in the special provisions of R146. Where a product or its packaging contains a common allergen, it must be declared, either in brackets after the ingredient in the list where the name does not make it obvious, or in a "Contains:" statement close to the ingredients list. For significant cereals, the cereal species must be named with "gluten" in brackets. Additives derived from or contaminated with a common allergen must show the allergen in brackets after the additive's name. Where there is a risk of cross-contamination in the factory, you must exercise due diligence to prevent it and implement an allergen control policy; precautionary "may contain" labelling cannot be used instead of good manufacturing practice.
Nutritional information
When you make a nutrition claim, such as "low fat", "high fibre" or "source of protein", the label must carry the minimum mandatory nutritional information in the table format of Annexure 2 of R146, plus the nutrient that is the subject of the claim. The values must be real, typical values determined by a reputable laboratory using recommended methods or methods accredited by SANAS or ILAC. Energy is declared in kilojoules, per serving and per 100 g or 100 ml. Claims themselves must meet the qualifying criteria in the regulations. If you make no claim, check whether your product category still needs nutritional information, and if you show it voluntarily, follow the prescribed format.
Net contents
The net quantity must be declared in SI units. Under the Legal Metrology Act, the markings on pre-packaged goods follow SANS 289, which covers how quantity is declared and the tolerance for packs. That makes fill accuracy a labelling issue: a filler or bagger that under-fills breaks the declared quantity.
Draft new regulations
Draft new labelling regulations to replace R146, including front-of-pack warning labels, were published for comment in 2023. Until new regulations are finalised and in force, R146 applies. Check the current position with the Department of Health before a major redesign, and design artwork so that a front-of-pack panel can be added later.
What this means for your production line
| Requirement | Equipment or routine |
|---|---|
| Batch number and date on every pack | Inkjet, thermal transfer or laser coder, synchronised with the line |
| Correct net contents | Accurate filler or weigher and a check-weigher |
| Labels applied so they cannot be removed at point of sale | Pressure-sensitive or wrap-around labeller, correct adhesive |
| Allergen control | Cleaning between products, segregation, documented allergen control policy |
| Traceability | Batch records, raw material lot records, dispatch records |
| Storage instructions | Printed on packs or labels at the required size |
Steps to get a label right
- List every mandatory item for your product from R146.
- Check product-specific rules, for example for maize meal, bread, dairy, fruit juice or bottled water, which have their own grading and marking regulations.
- Confirm allergens from supplier information for every ingredient.
- Get a laboratory analysis if you make any nutrition claim.
- Lay out the artwork at actual size and check letter heights.
- Plan coding: where on the pack the batch and date go, and which coder prints them.
- Review with a food labelling specialist or your environmental health office before printing large runs.
Common mistakes
- Name smaller than 4 mm on the main panel.
- Abbreviated date wording, such as "BBE" or "EXP".
- "Product of South Africa" on food made from imported ingredients.
- Allergens missing from the ingredients list.
- Nutrition claims without laboratory values.
- Coders that fail during the shift, leaving packs without dates.
- Under-filled packs against the declared quantity.
Where CISH fits
CISH supplies complete food production lines from audited factories in China, including coders, labellers, check-weighers and the batch records they feed, so the information R146 requires can be printed reliably at line speed. We do not design or approve labels; for label review, use a food labelling specialist or your environmental health office.
Frequently asked questions
Which regulation covers food labelling in South Africa?
R146 of 2010, the Regulations relating to the Labelling and Advertising of Foodstuffs, made under the Foodstuffs, Cosmetics and Disinfectants Act.
What must be on a food label in South Africa?
The name of the food, the name and address of the manufacturer, importer or seller, ingredients, common allergens, net contents, country of origin, a batch number, a date marking and, where applicable, storage and usage instructions.
How big must the writing be on a food label?
The name of the food must be at least 4 mm high on the main panel. Most other mandatory text must be at least 1 mm high for lower-case vowels, with smaller sizes allowed on small packs.
Is nutritional information compulsory in South Africa?
It is compulsory when you make a nutrition claim, in the prescribed table format with laboratory-determined values. Some product rules also require it.
Can I write "EXP" or "BBE" for the expiry date?
No. The words "best before", "use by" or "sell by" must be written out in full; only "BB" for best before is allowed.
What does "Product of South Africa" mean on a label?
That all the main ingredients, processing and labour come from South Africa. Food made locally from imported ingredients usually uses "Made in South Africa" or similar.
Are new food labelling regulations coming?
Draft regulations, including front-of-pack warning labels, were published for comment in 2023. R146 applies until new regulations are finalised.
Does CISH design food labels?
No. We supply production lines with the coding and labelling equipment that prints the required information.