The Red Meat Regulations of 2004 and the Poultry Regulations set separate requirements for rural, low throughput and high throughput abattoirs, and for cutting plants producing for export, with daily throughput limits for each category. In practice, provincial veterinary services handle applications, plan approval and inspection. Design the plant for its category from the start: layout, separation of clean and dirty areas, chilling, water, effluent and meat inspection facilities. CISH supplies complete slaughter lines sized to the category you register.
Regulations change. Confirm the current requirement with the authority named in each section before you commit money.
The basic rule: slaughter only at an abattoir
The Meat Safety Act says no person may slaughter an animal anywhere other than an abattoir, allow slaughter at a place under their control unless it is an abattoir, or sell or provide meat for human or animal consumption unless it was slaughtered at an abattoir. Slaughter for own consumption or for cultural or religious purposes is exempt, but meat or animal products from it may not be sold. If you plan to sell meat, chicken or game, you need a registered abattoir or a contract with one.
Throughput categories
The regulations divide abattoirs into categories, each with its own requirements for premises, equipment and inspection:
| Category | Typical fit | What changes |
|---|---|---|
| Rural abattoir | Very small numbers per day, rural communities | Simplest requirements, low daily limit |
| Low throughput abattoir | Small commercial plants | More facilities and inspection, moderate daily limit |
| High throughput abattoir | Larger commercial plants | Full facilities, continuous meat inspection, no low daily cap |
| High throughput cutting plant for export | Export cutting and deboning | Additional standards for export markets |
There are separate regulations for red meat (cattle, sheep, goats, pigs and similar), for poultry and rabbits, and for ostriches. The daily throughput limits for each category, counted in animal units or birds per day, are set in the regulations; confirm the current figures for your species with your provincial veterinary services before you design the plant, because the category decides much of the layout and cost.
Registration and grading
- Application. You apply for registration of the slaughter facility in the prescribed manner, with the prescribed fee. The Act places this with the national executive officer, who can assign functions to provincial executive officers; in practice you deal with the veterinary public health section of your provincial agriculture department.
- Certificate. If the facility complies, a registration certificate as an abattoir is issued, subject to conditions. It is valid for the period stated on it, up to five years.
- Conditions. These can relate to the essential national standards and anything needed to make sure the abattoir produces safe meat.
- Grading. The certificate shows a grading determined against the essential national standards.
- Withdrawal. Registration can be withdrawn or lapse if conditions are not met.
What the plant must have
Requirements differ by category, but most abattoirs need:
| Area | Typical requirements |
|---|---|
| Lairage or bird reception | Holding pens or crates, water, ante-mortem inspection area |
| Stunning and bleeding | Stunning equipment suitable for the species, bleeding area with blood collection |
| Dressing | For red meat, hide or skin removal and evisceration; for poultry, scalding, plucking and evisceration |
| Inspection | Facilities for meat inspection, hand-wash and sterilisers, rejection and condemnation areas |
| Separation | Clean and dirty areas physically separated, one-way flow from live animal to chilled carcass |
| Chilling | Chillers sized for the daily kill, with temperature records |
| Water | Potable water in quantity, hot water and sterilising water |
| By-products and waste | Offal, blood, feathers, hides and condemned material handled and disposed of correctly |
| Effluent | Wastewater treatment or a trade effluent permit |
| Staff facilities | Change rooms, toilets and hygiene stations |
Meat inspection and classification
Meat must be inspected before and after slaughter by qualified inspectors. Red meat carcasses sold in South Africa are also classified, and the industry's quality assurance company, SAMIC, audits meat classification at abattoirs. Plan space for inspection stations on the line and a classification point where it applies.
Halaal and other ritual slaughter
Ritual slaughter is provided for in the regulations, including for poultry slaughtered in abattoirs. If your customers require halaal meat, the certification body's requirements also shape the stunning and bleeding stations. Our guide to halal certification explains how certification works.
Steps to register a new abattoir
- Decide species and daily throughput, now and in five years.
- Confirm the category and its requirements with provincial veterinary services.
- Choose a site with zoning, water, power, road access and a way to handle effluent and waste.
- Prepare plans: building layout, process flow, equipment layout, water and effluent.
- Submit plans for approval before building, and ask for comments early.
- Build and install the plant and equipment as approved.
- Apply for registration with the prescribed fee.
- Inspection of the completed abattoir.
- Registration certificate with grading and conditions.
- Operate under inspection, keeping records of slaughter, temperatures, cleaning and condemnations.
Other approvals
- Environmental: waste and effluent handling, and in some cases environmental authorisation.
- Municipal: zoning, building plans, trade effluent, fire.
- Labour: machinery safety under the OHS Act.
- Market access: retailer audits, food safety certification and, for export, additional standards.
Poultry and red meat plants are different
A poultry abattoir is built around a continuous overhead shackle line: birds are hung, stunned, bled, scalded, plucked, eviscerated, washed and chilled, usually in water or air chillers, at a set number of birds an hour. A red meat abattoir handles fewer, heavier animals on rails or cradles, with separate areas for hide removal, evisceration, splitting, inspection and carcass chilling, and needs larger chillers for the same weight of meat. Lairage, blood handling, inedible by-products and effluent are bigger issues for red meat. The regulations reflect this, with separate rules for each species group, so a plant designed for one cannot simply be converted to the other. If you plan both, design separate lines and clean-dirty flows from the start.
Planning the business side as well? See how to start an abattoir business.
Records the inspector will ask for
From the first day of slaughter, keep records of animals or birds received and their origin, ante-mortem and post-mortem inspection results, condemnations, chiller temperatures, cleaning and sanitising, water quality tests, pest control and staff training. These records are how the abattoir shows it meets its registration conditions, and they matter when the registration is renewed.
Common mistakes
- Building before plan approval.
- Designing for one category and growing into another without the facilities.
- Undersized chillers. Carcasses cannot be cooled in time.
- No clean-dirty separation.
- Ignoring effluent and blood handling.
- No space for inspection stations.
Where CISH fits
CISH supplies complete slaughter lines from audited factories in China, for poultry and red meat, sized to your throughput category, with layouts, process flows and equipment drawings for your plan approval. We ship and clear the line, install and commission it, and train your team. Registration is applied for by the abattoir owner with provincial veterinary services.
Frequently asked questions
Do I need a registered abattoir to sell meat in South Africa?
Yes. The Meat Safety Act prohibits selling meat that was not slaughtered at an abattoir. Slaughter for own consumption or cultural and religious purposes is exempt, but that meat may not be sold.
What are the abattoir categories in South Africa?
Rural, low throughput and high throughput abattoirs, plus high throughput cutting plants producing for export, each with its own requirements and daily limits.
Who registers abattoirs?
Registration is under the Meat Safety Act; in practice, applications, plan approval and inspection go through provincial veterinary services.
How long is an abattoir registration valid?
For the period stated on the certificate, which may not exceed five years.
What is abattoir grading?
The grading the authority determines against the essential national standards and shows on the registration certificate.
Does CISH build abattoirs?
We supply complete slaughter lines and equipment layouts. The building and registration are the owner's responsibility.