Check that the people who handle refrigerant are registered authorised persons with SAQCC Gas through SARACCA, ask for three working rooms of a similar size and temperature you can visit, and insist the quote states the room size, panel thickness, temperature, product load, refrigeration capacity, refrigerant, electrical work, floor and door details, warranty and response time.

The short answer: what separates a good cold room company

CheckGood companyWarning sign
DesignCalculates heat load from your product, door openings and climateSells a room by size only
RegistrationRefrigerant handled by SAQCC Gas authorised personsCannot name the registered technician
ReferencesThree or more similar rooms you can visitPhotos only
QuoteItemised, with capacity, refrigerant and temperature statedOne line: 'cold room complete'
Refrigeration unitsNamed make and model, with spares available locally'Imported unit', no model
CommissioningPull-down test to temperature, written recordSwitch on and leave
ServiceWritten response time, 24-hour number'Call us if there is a problem'
WarrantyPanels, doors and refrigeration covered separately in writingVerbal promise

Who sells cold rooms

  • Kit sellers supply panels, doors and a refrigeration unit for you or a local technician to install. Lowest price, most risk on you.
  • Installers design, supply and install a complete room and look after it. This is what most food businesses need.
  • Refrigeration contractors handle units, piping and maintenance and often subcontract panels.
  • Turnkey companies supply cold rooms as part of a full processing plant, with the room sized to the line.

What every cold room quote must include

  1. Room size inside, in metres, and the number of pallet positions.
  2. Temperature for each room: chiller (about 0 to +5 °C), freezer (about −18 to −25 °C) or blast freezer.
  3. Product load: what goes in, how much a day, and at what temperature it arrives.
  4. Panel type and thickness: typically thicker for freezers, with the insulation type stated.
  5. Floor: insulated floor for freezers, heated floor where needed to prevent frost heave.
  6. Doors: hinged or sliding, size, heater strips on freezer doors, strip curtains.
  7. Refrigeration capacity in kW at your design conditions, make and model of the condensing unit and evaporator, and the refrigerant.
  8. Electrical work: supply, isolators, controls and alarms, with a certificate of compliance for the electrical installation.
  9. Controls and alarms: temperature display, data logging, high-temperature and power-fail alarms.
  10. Commissioning: pull-down test and a written record.
  11. Warranty and service: what is covered, for how long, and the response time.

If a quote leaves out any of these, ask for it in writing before you compare prices.

Cold store: receiving dock, blast freezing, chiller or freezer room, racked storage, monitoring & alarms, dispatch
Typical process flow: chiller, freezer and blast freezer rooms. Check that each supplier quote covers every step.

Refrigeration units and refrigerants

Ask for the make and model of the condensing unit and evaporator, check that spares and service for that make are available in your area, and ask for the energy use at your design temperature. Refrigerants matter: South Africa's ozone-depleting substances regulations set a phase-out schedule for HCFCs such as R22, so a new room should not use them. Any work on refrigerant must be done by an authorised person registered with SAQCC Gas, administered through SARACCA.

Electricity and backup

A cold room runs day and night. Eskom's standard tariff rose 8.76% for 2026/27. Thicker panels, good door discipline, strip curtains and an efficient unit cut the bill. Plan backup for power outages: a generator or a battery system sized for the refrigeration load, and alarms that warn you when the temperature rises.

Food safety

If you store food, the cold room is part of your food premises under R638 of 2018, and your Certificate of Acceptability depends on it. Washable panels, a cleanable floor, sealed joints, correct temperatures and temperature records are expected. Retailers and inspectors will ask for logs.

Questions to ask on a reference visit

  • Does the room hold temperature in summer and after deliveries?
  • How often has the unit failed, and how fast did the company respond?
  • Was the room delivered on time and at the quoted price?
  • Have there been ice, frost or door problems?
  • How high is the electricity bill compared with what was promised?

What a poor installer costs

  • Undersized unit: product arrives warm, the room never pulls down, and stock spoils.
  • No floor insulation in a freezer: frost heave damages the slab.
  • Cheap doors: air leaks, ice build-up and high power bills.
  • No alarm: a power failure overnight loses the whole stock.
  • No service: a simple fault becomes a total loss.

Choosing by situation

  • A butcher or farm stall with one small chiller: a reputable local installer.
  • A distributor with several rooms: an installer with refrigeration engineers and a service team.
  • A meat, dairy or produce processor: a turnkey company that sizes blast freezing and storage to the line.

Size before you ask for quotes

Work out how many pallets or tonnes you will store, at what temperature, and how much product comes in each day. Our guide what size cold room do I need shows how. With those numbers, quotes from different companies become comparable.

Worked example: comparing three quotes

A fruit packer in Limpopo asks three companies to quote a 60-pallet chiller at 2 °C. Quote A is the cheapest but lists only 'cold room 12 × 10 m complete with refrigeration'. Quote B gives panel thickness, door sizes, a named condensing unit with capacity in kW at 40 °C ambient, the refrigerant, an alarm with SMS alerts, electrical work with a certificate of compliance and a two-year warranty on refrigeration. Quote C is similar to B but sizes the unit for 32 °C ambient. The packer asks A for the missing items, and A's price rises above B. Quote C is cheaper than B but would struggle on the hottest days, when fruit arrives warm from the orchard. The packer chooses B and agrees a written service response time for harvest season. The figures are illustrative; the lesson is that only itemised quotes can be compared.

After installation: what a good company still does

A good cold room company services the refrigeration at agreed intervals, checks door seals and heater strips, cleans condenser coils, reviews temperature logs with you and keeps common spares. Ask for the service plan and its cost before you sign, because running costs and reliability over ten years matter more than a small saving on the purchase price.

How CISH helps

We supply cold rooms and blast freezers as part of complete processing lines, sized to the product the line makes. CISH designs the room, supplies panels and refrigeration from audited factories in China, ships and clears them, installs them with registered local technicians, commissions them to temperature and trains your team. If you only need one small room, a local installer is usually the better choice, and we are happy to review a quote you have received.

Frequently asked questions

How do I choose a good cold room company?

Check registered refrigeration technicians, visit similar rooms they have built, get an itemised quote, and agree service response times in writing.

What registration should a cold room installer have?

Anyone working with refrigerant must be an authorised person registered with SAQCC Gas, administered through SARACCA.

How much does a cold room cost in South Africa?

As an indication for 2026, small and medium chiller rooms cost about US$15,000–38,000 installed, and blast freezers start at about US$60,000.

What should a cold room quote include?

Room size, temperature, product load, panel thickness, floor, doors, refrigeration capacity and model, refrigerant, electrical work, alarms, commissioning, warranty and service.

Can a new cold room use R22?

It should not. HCFCs such as R22 are being phased out under the ozone-depleting substances regulations.

Does CISH install single cold rooms?

We supply cold rooms as part of complete processing lines. For a single small room, a local installer is usually the better choice.