The supplier that matters most is whoever designs and installs the refrigeration: check that their technicians are registered gas practitioners, that the plant does not use HCFC-22, and that the quote states the pull-down time and the room temperature at your local summer conditions.
Four ways to buy a cold room
People searching for a cold room in South Africa are usually after one of three things: a chiller room behind a shop or farm stall, a freezer room for a butchery or distributor, or cold storage and blast freezing for a processing plant. The suppliers that serve each are different, and many of them sell only part of the room. A cold room is two products, a box and a refrigeration system, and the box is the easy part.
| Supplier type | What you get | Price | Lead time | Who is responsible for temperature | Service | Suits |
|---|---|---|---|---|---|---|
| Panel manufacturer or panel reseller | Insulated panels, doors, floor detail; refrigeration often subcontracted or left to you | Low for the box | Short for standard sizes | Nobody, unless a refrigeration contractor is named in the contract | Door and panel repairs | Buyers with their own refrigeration contractor |
| Refrigeration contractor | Condensing units, evaporators, controls and piping, often with panels bought in; installation and maintenance | Moderate | Weeks for a standard room | The contractor, if the design is theirs | Local maintenance contracts | Shop, farm and distribution cold rooms up to a mid-sized store |
| Chinese kit maker, direct | Complete kit: panels, door, condensing unit and evaporator in a container | Lowest on the quote | Build plus shipping and clearance | You, once the kit lands | Remote; local service depends on the components fitted | Buyers with a local refrigeration contractor ready to install and maintain it |
| Turnkey processing-plant company | Cold rooms, blast freezers and ice designed with the processing line, installed and commissioned under one contract | Varies with scope | Part of the plant programme | The turnkey company, against stated temperatures and pull-down times | Contracted with the rest of the plant | Abattoirs, dairies, fruit and vegetable packhouses and food plants |
We do not sell panels on their own, and if all you need is a box for an existing refrigeration plant, a panel supplier is the right call. The trouble starts when a buyer orders panels from one company, a condensing unit from another and installation from a third, and no one has calculated the heat load.
The three things to check first
Who sized the refrigeration, and on what load?
A cold room is sized by heat load, not by volume: the product coming in and its temperature, how often the door opens, the ambient temperature on a summer afternoon in your area, lighting, people and the defrost cycle. Ask every supplier for the heat-load calculation behind the condensing unit they offer. If the answer is "we use a 5 HP unit for that size", the room has not been designed. Our cold room and blast freezer sizing guide explains the method.
Which refrigerant, and is it still serviceable?
Under South Africa's ozone-depleting substances regulations under the Air Quality Act, importing new or used refrigeration equipment containing HCFC-22 (R22) has been prohibited since 1 July 2014, and using HCFCs in new installations since 1 January 2015. HCFC supply is now capped at 2.5% of the baseline for 2026–2030, restricted to servicing from 2031, and banned from 2040. A used or bargain plant running on R22 will be expensive to keep charged. Ask which refrigerant the system uses and how the supplier will service it.
Are the technicians registered?
Work on refrigeration systems in South Africa falls under the Pressure Equipment Regulations, and SAQCC Gas keeps the register of "authorised persons" on behalf of the Department of Employment and Labour. For refrigeration and air conditioning, applications are processed by SARACCA, the contractors' association. Ask for the registration of the technicians who will install and service your plant.
Where to find cold room suppliers
- SARACCA's contractor directories. The South African Refrigeration and Air Conditioning Contractors' Association publishes directories of accredited contractors in Gauteng, KwaZulu-Natal and the Western Cape.
- SAIRAC and FRIGAIR. The South African Institute of Refrigeration and Air Conditioning owns FRIGAIR, the industry's exhibition. Regional editions are planned in Cape Town (2–4 March 2027, CTICC) and Durban (27–29 July 2027, Durban Exhibition Centre), with the main Gauteng show at the Gallagher Convention Centre.
- Food industry shows. FoodPro, held with Propak Africa at the Johannesburg Expo Centre (7–10 March 2028), is where processing-plant suppliers show cold chain together with production lines.
- Other cold room owners. Visit a store of a similar size and product. Ask what the room holds on a 35 °C day, how long a pull-down takes after a delivery, and what the electricity bill looks like.
- Importing a kit. If you buy from a Chinese factory, line up the local refrigeration contractor before you order, and read our supplier audit checklist.
We do not name or rate suppliers here. Use the checklist on every one.
How to choose: a 10-point cold room checklist
- Temperature guarantee: room temperature held at your design summer ambient, and the pull-down time for a full product load, in writing.
- Heat-load calculation: provided, with the assumptions stated.
- Refrigerant: not HCFC-22; named, with its servicing route.
- Registered technicians: authorised persons for installation and service.
- Panels and doors: insulation thickness for the temperature class, door type for the traffic, heated door frames and floor insulation on freezer rooms.
- Condensing unit and controls: brand and model named, with local service for that brand; alarms and temperature logging.
- Electrical: supply needed, starting current, and an electrical certificate of compliance for the installation.
- Power interruptions: how long the room holds temperature on a cut, and the generator size if you need one.
- Hygiene: food-safe finishes, drainage and cleanable surfaces for food premises.
- Service: maintenance plan, response arrangement, and what the warranty covers on compressor and controls.
Ten questions for any cold room supplier
- What temperature will the room hold at 35 °C outside, and what is the pull-down time with a full load?
- May I see the heat-load calculation?
- Which refrigerant does the system use?
- Who installs the refrigeration, and are they registered gas practitioners?
- What insulation thickness are the panels, and how is the floor insulated?
- What will the room use in electricity per day at design conditions?
- How is defrost handled, and where does the water go?
- What alarms and temperature records are included?
- Who services it, how quickly, and what does the warranty cover?
- Which installation of yours can I visit?
Comparing cold room quotes
| Item | What each quote should state |
|---|---|
| Room and temperature class | Internal dimensions, chiller or freezer, design temperature and design ambient |
| Panels | Thickness, facing, joints, floor detail, door type and size |
| Refrigeration | Condensing unit and evaporator models, refrigerant, capacity at design conditions, defrost |
| Controls and monitoring | Controller, alarms, temperature logging |
| Electrical | Supply required, wiring and the electrical certificate of compliance |
| Installation and commissioning | Pipework, vacuum and charge, pull-down test, handover documents |
| Backup | Generator or none; how long temperature holds on a cut |
| Freight and import | For imported kits: Incoterm, clearance and transport to site |
| Service and warranty | Maintenance visits per year, response, warranty terms |
| Owner's scope | Slab, drainage, electrical supply to the board, building alterations |

Common cold room mistakes
- Buying by size. Two rooms of the same size can need very different refrigeration if one receives warm product daily.
- A blast freezer used as a store, or a store used as a blast freezer. A holding room keeps frozen product frozen; it does not freeze warm product quickly. Freezing in a store damages the product and the stock already in it.
- Forgetting the floor. A freezer room on an uninsulated slab will heave the floor over time.
- Leaving out backup power. If the room holds product worth more than a generator, plan the generator. Larger sets have their own costs; diesel generating sets above 375 kVA carry 20% import duty.
- Pricing the box, not the running cost. Refrigeration runs every hour of every day; the efficiency of the plant matters more over ten years than the purchase price. Check the current electricity tariffs from Eskom or your municipality.
What cold rooms cost in 2026
Indicative prices in USD. The sizing guide explains what moves a project up or down the range.
| Purchase | Indicative price (2026) | Note |
|---|---|---|
| Imported cold room kit (panels, door, refrigeration) | About USD 5,000–40,000, plus about USD 2,500–7,500 installation | Before freight and clearance; local contractor needed |
| Small to medium chiller room, installed | USD 15,000–38,000 | Shop, farm and distribution use |
| Blast freezer | From USD 60,000 to several hundred thousand | Depends on batch size and pull-down time; plus backup power and civils |
| Cold store with blast freezing for a processing plant | Quoted per configuration | Designed with the processing line |
South African rules that affect your cold room
- Refrigerant rules. The ozone-depleting substances regulations prohibit importing equipment containing HCFC-22 and installing new HCFC systems, and cap HCFC supply at 2.5% of the baseline from 2026.
- Authorised persons. Refrigeration work is regulated under the Pressure Equipment Regulations; SAQCC Gas registers practitioners, with SARACCA processing refrigeration and air conditioning applications.
- Safety standard. SANS 10147 covers the safety of refrigerating systems; ask your supplier to design to it.
- Food premises. Where the cold room stores food, R638 of 2018 on hygiene for food premises and the transport of food applies, including temperature control and cleanable surfaces.
- Electrical compliance. The installation needs an electrical certificate of compliance under SANS 10142-1.
- Import duty. Industrial refrigerating equipment classified under 8418.69 is generally free of duty in SARS's 2026 tariff, while household refrigeration headings carry duty. Import VAT of 15% applies and VAT vendors can claim it back. See our import duty guide.
Where CISH fits
CISH designs, supplies, installs and commissions cold rooms, blast freezers and ice systems as part of complete food and agri-processing plants: abattoirs, dairies, packhouses and food lines. We size the refrigeration on the product load and your site's ambient, use refrigerants that can be serviced in South Africa, and hand over against a stated room temperature and pull-down time. We do not sell panels on their own or standalone shop cold rooms; for those, a local refrigeration contractor is usually the better choice.
For 2026 price bands, see cold room prices in South Africa; if you also need ice, see ice making machine prices.
Building a store to rent out space? Read how to start a cold storage business in South Africa.
Frequently asked questions
Who sells cold rooms in South Africa?
Panel manufacturers and resellers, refrigeration contractors, Chinese kit makers selling direct, and turnkey companies that build cold storage into processing plants. Most small cold rooms are supplied and installed by refrigeration contractors; plant cold stores are usually part of a larger project.
How much does a cold room cost in South Africa?
As an indication for 2026: an imported kit costs about USD 5,000–40,000 plus installation; a small to medium chiller room installed runs about USD 15,000–38,000; a blast freezer starts around USD 60,000. The heat load, temperature and backup power move the price most.
Can I still buy a cold room that runs on R22?
Importing new or used equipment containing HCFC-22 has been prohibited since July 2014, and new HCFC installations since January 2015. HCFC supply is capped at 2.5% of the baseline from 2026 and is banned from 2040, so an R22 plant is a poor buy even if it is cheap.
Does a cold room installer need to be registered?
Yes. Refrigeration work falls under the Pressure Equipment Regulations, and practitioners are registered as authorised persons with SAQCC Gas; SARACCA processes the applications for refrigeration and air conditioning. Ask for the registration before work starts.
What is the difference between a cold room and a blast freezer?
A cold room holds product at temperature. A blast freezer removes heat fast enough to freeze warm product in hours. They need different refrigeration capacity, and using one for the other's job damages product.
Is it cheaper to import a cold room kit?
The kit is usually cheaper than a locally built room, but you still need a registered refrigeration contractor to install, charge and service it, an electrical certificate, and a local service route for the condensing unit. Price those before you compare.
Does CISH supply cold room panels?
No. We supply complete cold rooms, blast freezers and ice systems as part of processing plants. For panels only, go to a panel manufacturer or reseller.