For machinery, the most valuable tasks are a physical factory audit, a written contract with clear specifications, and witnessing the factory acceptance test before the balance is paid. CISH supplies complete production lines and also works as a buyer-side engineering partner with published module fees, for example a factory audit from US$1,800.

What a sourcing agent does

TaskWhat it involvesWhy it matters for machinery
Supplier searchFinding factories that make what you needSeparating real factories from trading companies
Supplier auditVisiting the factory, checking licences, workshop, staff and referencesThe single best way to avoid a bad supplier
Quotation comparisonPutting offers on the same scopeCheap quotes often leave out key items
Negotiation and contractPrice, specification, delivery, payment, warrantyYour protection if something goes wrong
Production follow-upChecking progress and photosEarly warning of delays
Factory acceptance testWatching the machine run before shipmentYour last chance to fix problems cheaply
Pre-shipment inspectionChecking goods and packing before loadingAvoids missing parts and damage
Shipping and documentsBooking freight, export papersDocuments for clearance and VAT
Translation and liaisonEngineering meetings in Mandarin and EnglishMisunderstandings cost money

How agents are paid

Commission from the supplier

Many agents earn a commission paid by the factory. The service looks free to the buyer, but the commission is in the price. The risk is that the agent's income rises with the price you pay and depends on which factory wins, so the advice is not independent. Ask any agent directly whether they receive anything from suppliers, and get the answer in writing.

Fee paid by the buyer

Other agents charge the buyer, either as a percentage of the order value or as fixed fees for each task: a supplier shortlist, an audit, a day of FAT witnessing, an inspection per container. With buyer-paid fees, the agent has no reason to favour a supplier. Fixed task fees are easier to compare between agents and to budget.

Mixed models

Some agents charge a small buyer fee and also take supplier commissions. That is not necessarily wrong, but you should know.

What CISH charges, as an example

CISH publishes its buyer-side module fees on our procurement and sourcing page. As an indication:

ModuleHow it is priced
Supplier shortlist, 3–5 vetted candidates against your specificationFixed fee, from US$2,500
Factory audit with photo report, certification check and referencesFrom US$1,800 per audit
Negotiation and bilingual contractPercentage of contract value or fixed
FAT witnessing against your specification, with signed reportFixed fee per day on site
Pre-shipment inspectionFixed fee per container
Translation and liaisonHourly

We work as the buyer's engineer, not as a commission-taking agent.

What a good audit report contains

The factory audit is the task most worth paying for, so know what you should receive. A useful audit report for a machinery supplier covers:

  • Legal identity: business licence, registered name, unified social credit code, legal representative and address, matched against the quotation.
  • Workshop: the main machine tools, welding and assembly areas, and whether the parts for your machine are made in-house or bought in.
  • Similar machines: photos and video of machines like yours in production or testing.
  • Quality control: incoming inspection, in-process checks, final test bench and records.
  • Engineering team: how many designers and electrical engineers, and who will handle your order.
  • Key components: brands and origin of motors, drives, PLCs, pumps and bearings.
  • Export experience: recent shipments, documents and references.
  • Risks and recommendations: a clear view of whether to proceed and what to put in the contract.

A report that is only photographs of the gate and the showroom is not an audit.

How to check a sourcing agent

  1. Ask how they are paid, by whom, and get it in writing.
  2. Ask for a sample audit report from a past job, with client details removed.
  3. Ask who does the technical checks. A general trading agent may not understand a filling line or an extruder.
  4. Ask how they handle the FAT: who attends, what protocol, what happens if the machine fails.
  5. Check their own registration and contract terms: which law governs, where disputes go.
  6. Ask for references from buyers in Africa, ideally for similar equipment.
  7. Agree the scope and fee in a written agreement before they contact suppliers.

Agent, trading company or turnkey supplier?

OptionWho is responsible forTypical fit
Sourcing agentFinding, checking and following the supplier, up to shipmentBuyers with their own engineers to install and commission
Trading companySelling you goods it buys from factories; often marked upStandard goods, small orders
Turnkey supplierThe whole line, from specification to commissioning on your site, at agreed outputFirst lines, complex lines, buyers without an in-house project team

A sourcing agent can make buying in China much safer, but once the container is on the ship, an agent is usually no longer responsible for what happens. Installation, commissioning, training and spare parts are then up to you. If your team cannot do those, a turnkey supplier that answers for output in your factory is the better choice. Our guide to choosing a production line partner compares the models.

South African rules that still apply

An agent in China does not change what happens at home:

  • Import permits. Used or second-hand machinery needs an ITAC import permit before it is shipped.
  • Import VAT. SARS charges 15% VAT on the customs value plus duty plus 10%, paid before release.
  • Payments. Payments leave through your bank as an authorised dealer under the Reserve Bank's exchange control rules; your bank will ask for invoices and contracts.
  • Your importer's code. Your business must be registered with SARS customs as an importer.

Common mistakes

  • Choosing a "free" agent without asking how they are paid.
  • No physical audit. Photos and video calls are not enough for a large order.
  • The agent signs, not you. Make sure the contract is between your company and the factory, or that the agent's liability is clear.
  • No FAT. Paying the balance before seeing the machine run removes your leverage.
  • Assuming the agent will commission the line. Most do not.

Where CISH fits

CISH supplies complete production lines from audited factories in China, installed and commissioned in your factory, and also offers buyer-side modules, audits, contracts, FAT witnessing and inspections, at published fees for buyers who already know what they want to buy. Either way, we are paid by you, not by the factory.

Weighing the routes? Read local agent vs buying direct from China, with the full cost of each.

Frequently asked questions

What does a China sourcing agent do?

Finds and audits suppliers, compares quotes, negotiates contracts, follows production, witnesses tests, inspects goods before shipment and arranges shipping and documents.

How much does a China sourcing agent charge?

Some are paid by supplier commission built into the price; others charge the buyer a percentage of order value or fixed fees per task. As one example, CISH's factory audit is priced from US$1,800.

Is a free sourcing agent really free?

Usually not. A free agent is normally paid a commission by the supplier, which is included in the price you pay.

What is the most important thing a sourcing agent should do for machinery?

A physical factory audit before you pay a deposit, and witnessing the factory acceptance test before you pay the balance.

What is the difference between a sourcing agent and a turnkey supplier?

An agent is usually responsible up to shipment. A turnkey supplier is responsible for the line running in your factory at the agreed output.

Does CISH take commission from Chinese suppliers?

No. CISH works as the buyer's engineer and is paid by the buyer.