A process engineering company designs how a factory turns raw materials into products: the process steps, the mass and energy balances, the equipment specification, the plant arrangement, the utilities such as steam, refrigeration, compressed air, water and effluent, and often the controls. Many also manage the project, buy equipment on the owner's behalf, supervise installation and lead commissioning. They differ from equipment suppliers, which sell machines, and from turnkey or line companies, which supply a working line and take responsibility for its output. A small or medium factory installing a single line often does not; a capable line supplier can size and design the line, while a local engineer handles the building, structures or electrical design. Engineering firms usually charge fees by the hour, by phase or as a share of project cost, separate from equipment, so ask exactly what each phase delivers. Consulting Engineers South Africa (CESA) represents consulting engineering firms, and professional engineers register with the Engineering Council of South Africa (ECSA). CISH supplies, installs and commissions complete production lines, and works alongside the owner's engineers where a project has them.
What process engineers do
| Phase | Typical deliverables |
|---|---|
| Concept and feasibility | Process options, capacity, rough cost, site needs |
| Basic design | Process flow diagrams, mass and energy balances, equipment list and specifications |
| Detailed design | Plant arrangement, piping and instrumentation diagrams, utilities, electrical and control design |
| Procurement | Specifications for tenders, comparison of bids, supplier selection |
| Construction and installation | Supervision, coordination of contractors |
| Commissioning and handover | Start-up, performance tests, documentation, training |
Not every firm does every phase, and not every project needs all of them.
Engineering firm, equipment supplier or line company
- Engineering firm: works for you, specifies and manages, usually independent of equipment sellers; you carry the risk of buying and integrating unless the contract says otherwise.
- Equipment supplier: sells machines; integration and output of the whole line are not its responsibility.
- Turnkey or line company: designs and supplies a working line and is responsible for its output to agreed figures.
Our guide to production line suppliers compares the three.
When you need an engineering firm
- Large or multi-line plants where the process, utilities and building must be designed together.
- Steam, refrigeration, effluent or hazardous materials that bring design codes and permits.
- Structures and buildings needing professional sign-off.
- Projects financed by lenders who want an independent engineer's review.
- Owners without technical staff on complex projects who want someone working only for them.
Some installations need a registered professional engineer by law. The Driven Machinery Regulations, for example, require a certificate from a registered professional engineer for the design of certain transportation plant before use is approved.
When you probably do not
A small or medium factory installing one line, such as a bakery, a snack line, a bottling line or a feed mill, in an existing building often does not need a full engineering firm. A capable line supplier can size the line, specify utilities and provide the plant arrangement, while a local engineer or contractor handles building changes, structures and the electrical installation. Paying for a full engineering phase on a small project can cost more than the risk it removes.
What engineering firms charge
Engineering firms usually charge fees separate from equipment: by the hour, by phase, or as a share of the project cost. Ask for a clear scope of work for each phase, the deliverables, the number of site visits, and how changes are charged. Fees are worth paying when they reduce bigger risks; agree them before work starts.
How to choose an engineering firm
- Experience with your type of process, not just engineering in general.
- Independence from equipment sellers, or clear disclosure if they have commercial links.
- The team who will actually work on your project, and their registration.
- References from owners of similar plants.
- Clear deliverables for each phase and fee.
- Professional indemnity insurance.
- Company registration and track record.
CESA lists consulting engineering firms, and ECSA keeps the register of professional engineers and technologists.
Working with an engineering firm and a line supplier together
On many projects, the engineering firm writes the specification and evaluates bids, and line suppliers bid to supply against it. Make clear in both contracts who is responsible for what: who guarantees output, who designs interfaces between lines and utilities, who supervises installation and who leads commissioning. Gaps between the engineer's design and the supplier's scope are where delays and disputes start.
Safety duties
Under the OHS Act, designers carry duties for the articles and plant they design, and installers for the way they install them. A good engineering firm builds guarding, interlocks, emergency stops and safe access into the design, and documents them.
Worked example: a dairy expansion
A dairy in the Free State plans a new building with a UHT line, steam boilers, refrigeration and an effluent plant. It appoints an engineering firm to design the plant, the utilities and the building, and to write specifications for the process line. Three line suppliers bid; the dairy chooses one responsible for the line's output, and the engineering firm supervises installation and integration with the utilities. For a separate small yoghurt line in its existing building, the dairy buys directly from a line supplier without an engineering phase. The figures and names are illustrative.
Common mistakes
- Hiring an engineering firm for a simple single line, and paying for phases you do not need.
- Skipping engineering on a complex plant with steam, refrigeration and effluent.
- Unclear responsibility between engineer and supplier.
- No independence check on the engineering firm.
- Fees without clear deliverables.
What a good specification contains
Whether an engineering firm writes it or you write it with a line supplier, a good specification describes the product and its quality standard, the output per hour and per shift, raw materials and their variation, pack formats, the utilities available, the building and its limits, the standards the plant must meet, and how performance will be tested. It also sets out what documentation you expect: drawings, manuals, parts lists, wiring diagrams and software. Suppliers can then quote against the same job, and you can hold them to it.
Smaller engineering help
Between a full engineering firm and none at all, there is a middle path. You can hire an independent engineer for a few days to review a supplier's design, check utilities and the building, or attend a factory acceptance test on your behalf. Structural engineers can check floors and supports for heavy machines, and registered electrical contractors can design and certify the connection. Paying for targeted help where the risk sits is often better value for a small project than a full engineering contract. Agree the brief, the days and the deliverable in writing before the engineer starts, so that you pay for answers, not open-ended time.
Where CISH fits
CISH supplies, installs and commissions complete production lines for small and medium factories, sizing the line and specifying the utilities it needs. Where a project has its own engineers, we work to their specification and coordinate interfaces with them. For a large, complex plant, we will tell you if you need an engineering firm working for you.
Frequently asked questions
What does a process engineering company do?
It designs the process, specifies equipment and utilities, and often manages procurement, installation and commissioning.
Do I need a process engineer for a small factory?
Often not for a single line in an existing building; a capable line supplier and a local engineer may be enough.
How do engineering firms charge?
Usually by the hour, by phase or as a share of project cost, separate from equipment.
What is the difference between an engineering firm and a turnkey company?
An engineering firm designs and manages for you; a turnkey company supplies a working line and is responsible for its output.
How do I check an engineer's credentials?
Ask for their registration with ECSA, check references and experience with your process, and confirm professional indemnity insurance.
Does CISH work with engineering firms?
Yes, we supply lines to their specification and coordinate interfaces.