Natural water, which covers natural mineral, borehole and spring water, must come directly from a protected underground source, be bottled at or close to the source, and may only be filtered or decanted and have carbon dioxide removed or added. Water defined by origin, such as spring, rain or river water, comes from a specific environmental source outside a community water system and may be treated in defined ways, including ozone and antimicrobial treatment. Prepared water can come from any acceptable supply, including municipal water, and may be treated by any method, but must be labelled "prepared water" with the treatment method. All categories must meet maximum levels for listed elements and microbiological standards, be packed in sealed, sanitised containers, and declare key minerals on the label.

Regulations change. Confirm the current requirement with the authority named in each section before you commit money.

The three categories at a glance

Natural waterWater defined by originPrepared water
CoversNatural mineral water, natural borehole water, natural spring waterIceberg, snow, stream, rain, river, mist, spring, glacier and sea waterAny water not meeting the other categories, including tap water
SourceDirectly from natural or drilled underground sources, protected perimeterA specific environmental source, not through a community water systemAny acceptable water supply
Allowed treatmentFiltration or decantation (after aeration if needed); removing or adding carbon dioxideRemoving unstable constituents such as iron and manganese, adding carbon dioxide, air, oxygen or ozone, temperature change, removing excess elements, antimicrobial treatmentAny antimicrobial treatment and any treatment that changes the physical or chemical characteristics
Where bottledAt or close to the source; no bulk transport to another facilityAt a suitable plantAnywhere
Key label wording"Natural mineral water", "natural spring water" or similar; type of natural waterName showing the environmental source; method of sanitisation"Prepared water"; treatment method; "from a public or private distribution system" if from tap water

Natural water in detail

Natural water must:

  • Come directly from natural or drilled underground sources, with precautions inside a protected perimeter to keep its natural chemical and physical quality.
  • Be constant in composition, with a stable discharge rate and temperature, allowing for minor natural fluctuations.
  • Be collected in conditions that keep its original bacteriological purity and composition.
  • Be packaged at or close to the point where the source emerges.
  • Not be transported in bulk from the source to another facility.
  • Only be treated by separating unstable constituents through decantation or filtration, if needed after aeration, and by removing or adding carbon dioxide.

The label must show the product name, such as natural mineral water or natural spring water, the name and physical address of the source, the analytical composition in milligrams per litre, and the kind of natural water: naturally carbonated, non-carbonated, decarbonated, with added carbon dioxide from the source, or carbonated, optionally with words such as "still" or "sparkling".

For a plant, this means: no reverse osmosis, no remineralisation, no disinfection that changes the water's character, and a bottling hall at the source. A borehole also needs water use authorisation under the National Water Act.

Water defined by origin

This category covers water from a named environmental source, such as a spring or river, that does not pass through a community water system. It must be extracted within protective perimeters, and may be treated to reduce dissolved gases and unstable constituents such as iron, manganese and sulphur, to add or reincorporate carbon dioxide, to add air, oxygen or ozone as long as ozone by-products stay within the limits, to change temperature, and to reduce elements present above acceptable levels. Antimicrobial treatment is required to keep the water fit for drinking. The label must name the environmental source, its name and address, the method of sanitisation and the chemical composition.

Prepared water

Prepared water can come from any acceptable water supply, including municipal tap water or a borehole that does not meet the natural water rules. It may be given any antimicrobial treatment and any treatment that changes its characteristics, such as reverse osmosis, remineralisation, ozonation or pasteurisation, provided the result meets the general requirements. The label must say "prepared water", may add "carbonated" or "sparkling", must state the disinfection or treatment method and the chemical composition, and must carry the phrase "from a public or private distribution system" if the water came from a tap-water system. Many new bottled water businesses start in this category, because the source can be municipal water or a borehole and the treatment is flexible.

General requirements for all bottled water

  • No harmful substances or radioactivity in quantities that may harm consumers.
  • Maximum levels for elements listed in the Annexure, including antimony, arsenic, barium, boron, bromate, cadmium, chromium, copper, cyanide, fluoride, lead, manganese, mercury, nickel, nitrate (50 mg/L as nitrate), selenium, and pesticides and surface-active agents below the limit of quantification.
  • Microbiological standards at all stages from source to market, under the regulations on microbiological standards for foodstuffs.
  • Containers that are hermetically sealed and sanitised before use.
  • Mineral declaration on the label, in this order: calcium, magnesium, sodium, potassium, chloride, sulphate, alkalinity, nitrate and fluoride, plus total dissolved solids and pH; prepared water also declares iron and aluminium.
  • General food labelling under R146 also applies.

What this means for your equipment

CategoryTypical treatment and bottling
Natural waterFiltration, possibly aeration, CO2 handling; bottling hall at the source; strict hygiene and source protection
Water defined by originIron and manganese removal, filtration, ozone or UV, antimicrobial treatment
Prepared waterSand and carbon filtration, softening if needed, reverse osmosis, remineralisation, ozone or UV, storage
All categoriesBottle rinsing or blowing, filling and capping in a clean filling room, coding, labelling, laboratory testing

Ozone systems must be controlled so bromate stays within the limit, especially with bromide in the source water.

Premises, testing and industry standards

The bottling plant is a food premises under R638 and needs a Certificate of Acceptability from the municipality. Plan routine laboratory testing of source water and product, with records. Many retailers also look for bottlers that meet the standard of the South African National Bottled Water Association, an organisation of water bottling companies that adhere to its requirements. Drinking water quality in South Africa is generally referenced to SANS 241.

Common mistakes

  • Calling treated water "natural" or "spring" water.
  • Trucking borehole water to a bottling plant and selling it as natural water.
  • No "prepared water" wording on treated municipal water.
  • Missing mineral declarations.
  • Uncontrolled ozone creating bromate.
  • No testing records.

Where CISH fits

CISH supplies complete bottling plants from audited factories in China, with water treatment designed for the R718 category you will sell, bottle blowing or rinsing, filling, capping, coding and labelling. We ship and clear the plant, install and commission it, and train your team. Product classification and labelling are the bottler's responsibility.

Frequently asked questions

Which regulation covers bottled water in South Africa?

R.718 of 2006, the Regulations relating to all Bottled Waters, under the Foodstuffs, Cosmetics and Disinfectants Act.

What are the categories of bottled water?

Natural water (mineral, borehole and spring), water defined by origin, and prepared water.

Can I bottle municipal tap water?

Yes, as prepared water, labelled "prepared water" with the treatment method and the phrase "from a public or private distribution system".

Can natural water be treated with reverse osmosis?

No. Natural water may only be filtered or decanted and have carbon dioxide removed or added. Reverse osmosis makes it prepared water.

What must be on a bottled water label?

The category-specific name and information, the declared minerals in the set order with total dissolved solids and pH, and the general labelling information required by R146.

Does CISH classify bottled water?

No. We design the treatment and bottling line for the category you choose; classification and labelling are yours.