Then decide whether to blow your own bottles from preforms (cheaper per bottle at volume, but needs a blower, high-pressure compressor and chiller) or buy ready-made bottles (simpler, more storage and freight). Treatment depends on your water: South Africa's bottled water regulations (R.718 of 2006) recognise natural water, water defined by origin and prepared water, and the treatment you are allowed and need differs for each; prepared water from municipal or borehole supply is usually filtered, often reverse-osmosis treated, and disinfected with ozone or UV. CISH supplies, installs and commissions complete water bottling plants.
Step 1: size from sales
| Bottles a day (peak) | Shifts | Bottles an hour needed | Plant class |
|---|---|---|---|
| Up to about 3,000 | 1 | Under 500 | Semi-automatic machines |
| 5,000–15,000 | 1 | About 700–2,000 | Monoblock of 1,000–4,000 bph |
| 15,000–30,000 | 1–2 | About 2,000–4,000 | Complete line 2,000–4,000 bph |
| 40,000–80,000 | 1–2 | About 6,000–12,000 | Complete line 6,000–12,000 bph |
Allow headroom of 20–30% for peaks such as summer and holidays, and for stoppages.
Step 2: choose your bottle sizes
Most plants start with one or two sizes, for example 500 ml and 1.5 L, and add 5 L or 18.9 L later. Each size needs change parts on the filler and a mould on the blower. Large returnable bottles need a separate washer and filler.
Step 3: blow your own bottles or buy them?
| Blow your own from preforms | Buy ready-made bottles | |
|---|---|---|
| Equipment | Blower, high-pressure compressor, chiller, moulds | None |
| Cost per bottle | Lower at volume | Higher |
| Storage | Preforms take little space | Empty bottles take a lot |
| Flexibility | Change bottle shapes with new moulds | Limited to supplier's range |
| Fits | From about 2,000 bottles an hour | Small plants and start-ups |
Semi-automatic PET blowers cost about US$3,500–15,000 and automatic blowers about US$20,000–95,000, before compressors and moulds.
Step 4: match treatment to your water and product
- Natural water or water defined by origin from a protected source: the regulations restrict which treatments are allowed, so the source quality matters most.
- Prepared water from municipal or borehole supply: sand and carbon filtration, softening where needed, reverse osmosis for high dissolved solids, remineralisation if desired, and ozone or UV before filling.
Test your water at an accredited laboratory before designing treatment, and check whether your borehole abstraction needs registration or a licence with the Department of Water and Sanitation. Product water should meet SANS 241 as a minimum, and R.718 sets further requirements for bottled water. Our bottled water regulations guide explains the categories.
Step 5: choose the automation level
- Semi-automatic: separate filler, capper and labeller with people moving bottles; low cost, labour-heavy, more contamination risk.
- Monoblock: rinse-fill-cap in one enclosed machine; the core of most commercial plants.
- Complete line: blower, monoblock, labeller, date coder, shrink wrapper and conveyors, sometimes a palletiser.
Supermarkets and large customers expect consistent fills, codes and shrink packs that a complete line delivers.
Step 6: utilities and the building
A clean filling room with filtered air and washable surfaces, a treatment room, preform and packaging stores, a finished goods warehouse and loading area. Power for the compressor, blower, RO pumps and chiller is the largest running cost after packaging; Eskom's standard tariff rose 8.76% for 2026/27. Ask suppliers for connected load and energy per thousand bottles.
Approvals and industry standards
Your premises need a Certificate of Acceptability under R638, and labels must meet R.718 and the food labelling rules. Many retailers expect bottlers to meet the standards of the South African National Bottled Water Association, which audits members.
Worked example: sizing a first plant
A business in Mpumalanga expects to sell 12,000 bottles of 500 ml and 2,000 bottles of 1.5 L a day in summer, on one shift. That is about 2,000 bottles an hour at peak. It chooses a complete line rated at 3,000 bottles an hour with a two-cavity automatic blower, a rinse-fill-cap monoblock with change parts for both sizes, a labeller, a coder and a shrink wrapper, and an RO and ozone system sized for the line plus a future 5 L filler. The figures are illustrative.
Cost per bottle
Add preform or bottle, cap, label and shrink film, treated water including RO reject, electricity for the blower, compressor and pumps, labour, filters and chemicals, laboratory tests, distribution and finance. Packaging is usually the largest share; energy is next. Compare the result with shelf prices, leaving room for distributor and retailer margins.
Five questions before you buy
- How many bottles a day, of which sizes, at peak?
- What does your water test show?
- Will you blow bottles or buy them?
- What energy and floor space does the line need?
- Who commissions the line on your water and trains your team?

From a delivered project: A 12,000 bottles-an-hour PET water line combined filling, blowing and labelling from China with locally fabricated steelwork and a local water-treatment specialist under one project lead; it landed at about US$850,000, six to eight weeks faster than a fully imported line, with more than 40% local content. Read the hybrid bottling line case study.
Common mistakes
- Sizing on hope rather than signed customers.
- A blower without enough compressor capacity.
- Treatment designed before the water test.
- No headroom for summer peaks.
- No space for empty bottles and finished stock.
Water source and testing come first
Before you choose a plant, know your water. Borehole water may contain iron, manganese, hardness, nitrates or bacteria; municipal water contains chlorine that must be removed before some treatment stages. A laboratory analysis of your source decides which filters, softeners, reverse osmosis and disinfection you need. Test again after treatment and keep records: buyers and inspectors will ask for them.
Plan for regular testing of finished water, bottle and cap hygiene, and cleaning of tanks and pipes. A small laboratory with simple tests for chlorine, pH and conductivity, plus routine microbiological tests at an external lab, is usually enough to start. Labels must meet the general labelling rules and any rules for bottled water that apply to your product.
Matching capacity to sales
Size the plant for bottles you can sell, not bottles the machine can make. Count your outlets, the bottles each sells per week, and your delivery capacity. A plant running one shift at a steady pace is better than a larger plant waiting for orders. Leave space in the building to add a second filler or a larger pack size later.
Where CISH fits
We supply complete water bottling plants, treatment, blowing, filling, capping, labelling and packing, from audited factories in China, sized to your sales and water. CISH ships, clears, installs and commissions the plant on your water, and trains your team. For a single semi-automatic filler, a local supplier is usually the better buy.
Frequently asked questions
What size water bottling plant do I need?
Work back from peak bottles a day and shifts; for example, 10,000 bottles a day on one shift needs about 1,500 bottles an hour.
Should I blow my own bottles?
Usually from about 2,000 bottles an hour; below that, bought-in bottles are simpler.
What water treatment does a bottling plant need?
It depends on the source and product category; prepared water usually needs filtration, often reverse osmosis, and ozone or UV.
How much does a water bottling plant cost?
As an indication for 2026, a complete line with treatment costs about US$150,000–400,000 for 2,000–4,000 bottles an hour.
What regulations apply to bottled water?
R.718 of 2006 for bottled water, SANS 241 for drinking water quality, and R638 for the food premises.
Does CISH supply water bottling plants?
Yes, complete plants with commissioning and training.