The SABS quotes certification per product; NRCS publishes its fees, for example R2,147.83 for a safety LOA application from May 2025. CISH supplies, installs and commissions production lines that can make product consistently to the standard; certification is applied for by the manufacturer.
Regulations change. Confirm the current requirement with the authority named in each section before you commit money.
SABS mark, test report or NRCS LOA?
| SABS test report | SABS mark (certification) | NRCS Letter of Authority | |
|---|---|---|---|
| What it is | A report on how a sample performed against a standard | A permit to use the SABS mark on certified products | Authority to sell a product covered by a compulsory specification |
| Compulsory? | No | Applied for voluntarily; often required by buyers and tenders | Yes, for products under a compulsory specification |
| Issued by | SABS laboratories | SABS certification | National Regulator for Compulsory Specifications |
| Covers the factory? | No | Yes: the quality system is assessed | No; product test reports and documents |
| Ongoing checks | None | Surveillance testing and audits | Renewal; port and market inspections |
| Can you say "SABS approved"? | No | Yes, for certified products | No; an LOA is not the SABS mark |
When a manufacturer needs the SABS mark
You need it when your buyer, a tender or a specification requires product certified to a SANS standard. Common cases for manufacturers:
- Building materials: concrete masonry units (SANS 1215), paving blocks (SANS 1058), clay bricks (SANS 227) and precast products for public works.
- Hygiene products: sanitary towels to SANS 1043, often specified by public buyers.
- Products sold to retailers that ask for the mark as proof of consistent quality.
If nobody in your market asks for it, a test report may be enough to show compliance, but it does not let you claim approval.
How to get the SABS mark
The SABS sets out the process:
- Check that a standard exists. The product must fall within the scope of a SABS or SANS national specification.
- Prepare the factory. Production should already run under a quality system: ISO 9001 or the specific permit conditions for the product.
- Apply for certification to the SABS for the product and standard.
- Testing. Samples are fully tested to the standard.
- Quality system assessment. The SABS assesses your production facility and quality system.
- Permit. If product and quality system comply, the SABS issues a permit to apply the mark.
- Surveillance. After certification, products are tested and the quality system audited regularly to keep the permit.
What it costs
The SABS quotes certification per product and standard; the cost depends on the testing the standard requires, the number of products or variants, and the assessment and surveillance. Ask the SABS for a quotation once you know your product family and standard. Budget too for the internal cost: a quality system, testing equipment, records and the staff to run them.
NRCS Letter of Authority in brief
Products covered by compulsory specifications must have an NRCS Letter of Authority (LOA) before they are sold. For electrical products, the NRCS publishes fees: under GN R.6235 of 30 May 2025, an LOA application for safety costs R2,147.83, for energy efficiency R2,147.83 and for both R4,295.66. LOAs are valid for three years, and the NRCS states it processes applications within 120 calendar days. Apparatus designed and sold exclusively for industrial purposes is outside the main electrical specification, VC 8055, so production machinery for your own factory usually does not need an LOA. Electric motors sold separately must meet minimum efficiency requirements under VC 9113 from 4 June 2025, except motors completely integrated into a machine.
What certification means for your production line
Certification tests whether you can make the product consistently, not once. The line must hold the standard every day:
- Process control: weighing accuracy, mixing, curing or heat treatment held within limits and recorded.
- Testing equipment: the tests the standard requires, or access to an accredited lab.
- Traceability: batch codes from raw material to dispatch.
- Records: results and corrective actions kept for the auditor.
When you buy a line, ask the supplier which standard the product must meet and how the line's controls and records support it.
Preparing for the SABS assessment: a checklist
- Buy the standard from the SABS webstore and read the full text, including sampling and test methods.
- Map each requirement to a step in your process: raw material, mix or formulation, forming, curing or heat treatment, packing.
- Set control limits for each critical step and record them every shift.
- Equip a laboratory for the routine tests the standard requires, or contract an accredited laboratory.
- Calibrate scales, thermometers and test equipment, and keep the certificates.
- Write procedures for production, testing, non-conforming product and complaints.
- Train staff on the procedures and keep training records.
- Code every batch so that a failed test can be traced to raw materials and production records.
- Run a trial period of several weeks with records before you apply, so the assessor sees a working system rather than a new one.
- Plan for surveillance: budget staff time and test costs for the years after certification, not only the first assessment.
A factory that already runs this way passes assessment faster and spends less on corrective action.
Common misconceptions
- "We have a test report, so we are SABS approved." Only certified products may be claimed as SABS approved.
- "An NRCS LOA and the SABS mark are the same." They are different documents from different bodies for different purposes.
- "Our machine is SABS approved, so our product is." Certification is for products made under an assessed quality system, not for the machine.
- "Certification is once-off." The permit depends on continuing tests and audits.
Where CISH fits
CISH supplies, installs and commissions production lines from audited factories in China that can make product consistently to the relevant SANS standard, with the process controls and records an assessment looks for. We do not apply for certification: the manufacturer applies to the SABS, or to the NRCS for an LOA.
Frequently asked questions
What is SABS approval?
Usually the SABS mark: a certification permit issued when a product meets a SANS standard in full testing and is made under a quality system the SABS has assessed. A test report alone is not approval.
Is SABS approval compulsory?
The SABS mark is applied for voluntarily, but many buyers, specifications and tenders require it. Products under a compulsory specification need an NRCS Letter of Authority, which is compulsory.
How much does SABS certification cost?
The SABS quotes per product and standard; the cost depends on the testing, the number of variants and the assessment. Ask the SABS for a quotation.
What is the difference between SABS and NRCS?
The SABS writes standards and offers testing and certification. The NRCS enforces compulsory specifications and issues Letters of Authority for regulated products.
How much is an NRCS LOA?
From 30 May 2025, an LOA application for safety costs R2,147.83, for energy efficiency R2,147.83 and for both R4,295.66 (GN R.6235).
Does production machinery need an NRCS LOA?
Apparatus designed and sold exclusively for industrial purposes falls outside the main electrical specification, VC 8055, so machinery for your own factory usually does not. Separately sold motors must meet the motor efficiency specification.
How long does SABS certification take?
It depends on the standard, the testing and how ready your quality system is. Factories that have run their procedures and records for some weeks before applying move faster. Ask the SABS for an estimate with the quotation.
Does CISH get products SABS approved?
No. The manufacturer applies for certification. We supply lines that can make product consistently to the standard.