The process differs completely between crisps, extruded puffs and nuts, so choose the snack before the supplier. Savoury snacks and crisps also have legal sodium limits, which the seasoning system must hit every batch.

Who sells snack production lines

Snack brands, maize millers adding puffs, potato growers, nut processors and entrepreneurs entering the spaza and school market all look for snack lines. They meet four kinds of supplier.

Supplier typeWhat they sellPriceWho answers for outputBest fit
Food machinery dealerFryers, slicers, seasoning drums, small extrudersModerateThe dealer, per machineSmall producers adding a machine
Packaging machine supplierMultihead weighers, vertical baggers, nitrogen flushingModerate to highThe supplier, for packingPlants upgrading the packing end
Chinese factory, directCrisps lines, extrusion lines, flavouring systems, packingLowest on the quoteYou, after deliveryBuyers with process technicians
Turnkey snack line companyRaw material to cartons, laid out and commissionedBetween direct and dealerThe turnkey company, at agreed kg per hourNew brands and first lines

Three snacks, three different lines

Potato crispsExtruded puffsRoasted or coated nuts
Raw materialFresh potatoesMaize grits, rice or other cerealsPeanuts and other nuts
Core processWash, peel, slice, fry, de-oilMix, extrude, dry or fry, coatRoast or fry, cool, coat, season
Key machineContinuous or batch fryerExtruder with the right dieRoaster or coating pan
FlavouringSeasoning drum after fryingOil and powder coating drumCoating pan or tumble drum
PackingNitrogen-flushed bagsBags, often nitrogen-flushedBags or jars
Main cost driverPotatoes and frying oilGrits, oil and flavourNuts

A crisps line cannot make puffs, and a puff extruder cannot make crisps. Ask suppliers for references on the snack you plan, not on snacks in general.

What to check in the supplier

Output measured as finished product

Snack output can be stated as raw material in, or product out. Ask for kilograms of packed product per hour at your pack size, because frying and drying remove water and weight.

Frying, drying and oil

For fried snacks, oil quality, filtration and turnover decide flavour and shelf life. Ask how the fryer filters oil, how much oil it holds, and what oil uptake per kg of product to expect. For extruded puffs, ask whether the line dries, fries or bakes, and the energy each uses.

Seasoning accuracy

Seasoning drives taste, cost and compliance. Ask how the drum doses oil and powder, and how evenly it coats at full speed.

Where to find snack line suppliers

  • Food and packaging trade shows in Johannesburg and Cape Town show extruders, fryers and baggers; confirm dates with the organisers.
  • Flavour and seasoning houses know which equipment their customers run.
  • Working lines: visit one making a snack like yours at a similar output.
  • China: many crisps and extrusion lines sold in Africa are built in China. Use our supplier audit checklist before paying anything.

No snack line supplier is named or rated here.

How to choose: a 10-point checklist

  1. Snack type chosen: crisps, puffs, nuts or several.
  2. Kilograms of packed product per hour, demonstrated at handover.
  3. Raw material preparation: potato washing and peeling, grits handling, nut cleaning.
  4. Core process: fryer, extruder or roaster sized for the output.
  5. Oil system: filtration, heating and oil turnover.
  6. Seasoning: dosing accuracy and changeover between flavours.
  7. Packing: weigher, bagger, nitrogen flushing and coding.
  8. Utilities: gas or thermal oil, power, compressed air, water and effluent.
  9. Installation, commissioning on your raw materials, and training.
  10. Spare parts and support: blades, dies, screws, belts.

For crisps and frozen fries line prices, see potato chips making machine prices.

Starting from scratch? See how to start a chips manufacturing business.

Ten questions to ask

  1. What kilograms of packed product per hour does the line give at my pack?
  2. What raw material does it need, and how much per kg of product?
  3. What is the oil uptake, and how is oil filtered?
  4. How is the fryer, dryer or extruder heated, and what fuel does it use?
  5. How accurate is seasoning at full speed?
  6. How long does a flavour change take?
  7. What packing machine is included, and does it flush nitrogen?
  8. Is installation, commissioning and training included?
  9. What wear parts come with the line, such as dies, blades and screws?
  10. Which snack plant in South Africa runs this line, and can I see it?

Comparing snack line quotes

SectionWhat each quote should state
Raw material preparationWashing, peeling, slicing, or grits and mixing
Core processFryer, extruder or roaster, capacity, heating
Oil handlingTank, filtration, heat exchanger
De-oiling and coolingCentrifuge or vibrating belt, cooler
SeasoningDrum, oil and powder dosing
PackingWeigher, bagger, nitrogen, coder
UtilitiesBurner or thermal oil heater, compressor
Installation and trainingEngineer days, trials on your product
Owner's scopeBuilding, gas connection, effluent, permits

Align the scopes first; only then compare totals. Our same-scope comparison shows the method.

Potato crisps line: washing & peeling, inspection, slicing, rinsing, frying, de-oiling, seasoning, packing
Typical process flow: About 100–300 kg/h, semi-automatic. Check that each supplier quote covers every step.

Common mistakes

  • Quoting raw material output as product output.
  • Buying the extruder without the die and coating system.
  • No oil filtration. Flavour and shelf life suffer.
  • Seasoning by hand. Salt and taste vary, and sodium limits are missed.
  • Packing without nitrogen. Crisps break and go stale.

Snack line prices in 2026

Indicative, in USD:

PurchaseCapacityIndicative price (2026)
Semi-automatic potato crisps line100–300 kg/hAbout US$15,000–80,000
Fully automatic frozen chips lineBlanch, fry, quick-freeze, packAbout US$120,000–500,000 or more
Extruded puff lineDepends on extruder, dryer or fryer, coatingQuoted per configuration
Groundnut roasting core line300–700 kg/hAbout US$20,000–90,000
Industrial snack plantTonnes per hourQuoted per configuration

The groundnut figure comes from our nut processing cost guide.

Rules and duties for snacks in South Africa

  • Sodium limits. R214 of 2013 set legal maximums per 100 g, from 30 June 2019 of 700 mg sodium for ready-to-eat savoury snacks and 550 mg for flavoured potato crisps, with a higher limit for salt-and-vinegar flavours. The regulations have since been amended; check the current table.
  • Food premises. The plant must meet R638 of 2018 and hold a Certificate of Acceptability.
  • Labels. Packs must follow R146 of 2010 for labelling.
  • Import competition. Prepared potato products (2005.20.90) carry 20% general duty and puffed cereal snacks (1904.10) 25%, though both enter free from the EU and UK and from SADC.
  • Machinery duty. Food preparation machinery (8438.80) is free of general duty. Import VAT of 15% is reclaimable by VAT vendors; the import duty guide explains the calculation.

Where CISH fits

CISH is a turnkey snack line company. We specify crisps, extrusion and nut lines from audited factories in China against your snack and pack, ship and clear them, and install and commission the line with kilograms per hour demonstrated on your raw materials, and your operators trained. We suit snack brands building a first line or expanding. For a single fryer or seasoning drum, a local dealer is often the better choice.

Frequently asked questions

Who sells snack production lines in South Africa?

Food machinery dealers, packaging machine suppliers, Chinese factories selling direct, and turnkey companies that supply complete lines from raw material to sealed packs.

How much does a snack production line cost?

As an indication for 2026, a semi-automatic potato crisps line for 100–300 kg an hour costs about US$15,000–80,000. Extruded puff lines are quoted per configuration.

Are there salt limits for snacks in South Africa?

Yes. R214 of 2013 set maximum sodium per 100 g for savoury snacks and potato crisps, with stricter limits from 2019, since amended.

Can one line make crisps and puffs?

No. Crisps need slicing and frying; puffs need an extruder and coating. Packing and seasoning can sometimes be shared.

Is snack machinery duty-free?

Food preparation machinery (8438.80) is free of general duty in SARS's 2026 tariff. Import VAT of 15% applies.

Does CISH sell single fryers or extruders?

No. We supply complete snack lines, installed and commissioned. For a single machine, a local dealer is usually the better route.