Blow moulding machines carry no general import duty in South Africa, and import VAT of 15% is reclaimable by VAT vendors. CISH supplies, installs and commissions blowers as part of complete filling lines; for a single semi-automatic blower, a local dealer is often the better buy.
Blow moulding machine prices, 2026
| What you buy | Typical output | Indicative listed price (2026) | Fits |
|---|---|---|---|
| Semi-automatic PET blower, two cavities | Several hundred to about 1,000 small bottles an hour; large jars at lower rates | About US$3,500–15,000 ex-works | Small water and juice bottlers |
| Fully automatic PET blower, two to six cavities | A few thousand to over 10,000 bottles an hour | About US$20,000–95,000 ex-works | Bottlers with a continuous filling line |
| HDPE extrusion blow moulder | 1–20 litre jerrycans and containers | About US$13,000–50,000 ex-works | Oil, chemical, lubricant and dairy packers |
| Preform injection machine | Your own PET preforms | About US$30,000–75,000 plus the mould set | High-volume bottlers |
| Blower inside a complete filling line | Matched to the filler | Quoted per configuration | New bottling plants |
These are listed prices from Chinese factories, collected in November 2026, not quotes. They vary with cavities, bottle size, heating and servo drives. Freight, clearing, installation and the air system come on top.
What the price leaves out
| Item | Why it matters |
|---|---|
| Moulds | Each bottle design needs its own mould; extra moulds can cost a large share of a small machine's price |
| High-pressure compressor | PET blowing needs high-pressure air; the compressor is often the largest power load |
| Air dryer and filters | Wet or oily air marks bottles and damages valves |
| Chiller | Mould cooling sets cycle time and bottle quality |
| Preform handling | Hopper and unscrambler on automatic machines |
| Conveying | Air conveyor or storage between blower and filler |
| Installation and training | Setting moulds and process takes skill |
Semi-automatic or fully automatic?
| Semi-automatic PET | Fully automatic PET | |
|---|---|---|
| Loading | Operators load preforms and remove bottles | Automatic preform feed and bottle discharge |
| Output | Low; depends on operators | Steady, matched to a filler |
| Labour | One or two operators per machine | Few operators per shift |
| Bottle consistency | Varies more | More consistent |
| Price | About US$3,500–15,000 | About US$20,000–95,000 |
| Best for | Small bottlers and large jars | Continuous filling lines |
PET bottles or HDPE containers?
PET stretch blowers make clear bottles from preforms for water, juice, cooldrinks and edible oil. HDPE extrusion blowers make opaque containers and jerrycans from pellets, for lubricants, chemicals, detergents and some dairy. Choose by the container your buyers want; the machines are not interchangeable.
Blowing your own bottles or buying them in
| Buying finished bottles | Blowing from bought preforms | Making preforms and blowing | |
|---|---|---|---|
| Equipment | None | Blower, moulds, air system, chiller | Preform injection machine and mould, plus everything for blowing |
| Space and freight | Bulky deliveries of empty bottles | Compact preform cartons | Resin bags only |
| Bottle cost | Highest per bottle | Lower | Lowest at high volume |
| Skills | Purchasing only | Blow moulding technicians | Injection and blow moulding technicians |
| Flexibility | Limited to the bottle maker's range | Your own bottle designs, within the preform neck | Full control of preform and bottle |
Most small bottlers start by buying bottles, move to blowing from bought preforms when volume grows, and only make preforms at high volume. Work out the cost per thousand bottles at your volume for each route before choosing a machine.
Moulds, changeovers and bottle design
Every bottle shape and size needs its own mould, and each mould has the same number of cavities as the machine. A two-cavity blower needs two-cavity moulds; a six-cavity blower needs six. When you compare quotes:
- Count the moulds included and price each extra design.
- Ask how long a mould change takes, because short runs of many sizes lose hours.
- Check the bottle drawing: wall thickness, base design and neck finish decide whether the bottle survives filling, capping and transport.
- Ask who owns the design, if the factory draws the bottle for you.
Landed cost in South Africa
| Cost item | How to plan |
|---|---|
| Machine and moulds | Ex-works price from the factory |
| Air system and chiller | Often bought with the machine |
| Freight | One container for most blowers; more with compressors and conveyors |
| Duty | Blow moulding machines (8477.30) carry no general duty |
| VAT | 15% on the customs value plus a 10% uplift plus duty, reclaimable by VAT vendors |
| Clearing and transport | Agent fees, port charges, delivery to site |
| Installation | Engineer days, mould setting, trials |
Worked example: a water bottler blowing its own bottles
An illustration only:
| Item | Assumption |
|---|---|
| Bottles | 500 ml and 1.5 litre PET water |
| Machine | Fully automatic two- or four-cavity blower |
| Price | Within US$20,000–95,000 ex-works, by cavities and drive |
| Extras | Moulds for both sizes, high-pressure compressor, dryer, chiller |
| Preforms | Bought in, sized to the blower's neck and heating |
| Payback logic | Preforms take far less space to ship and store than finished bottles |
Blowing your own bottles saves on bottle cost and transport, but adds air, moulds and maintenance. Below a certain volume, buying finished bottles is simpler.
How to compare blower quotes
- Bottles per hour at your bottle size.
- Cavities, stations and heating method.
- Moulds included and their designs.
- Compressor, air dryer and filters, with air consumption.
- Chiller and mould temperature control.
- Preform handling or parison control.
- Conveying to the filler.
- Installed power for the whole set-up.
- Installation, commissioning and training.
- Warranty and spare parts.

From a delivered project: A 12,000 bottles-an-hour PET water line combined filling, blowing and labelling from China with locally fabricated steelwork and a local water-treatment specialist under one project lead; it landed at about US$850,000, six to eight weeks faster than a fully imported line, with more than 40% local content. Read the hybrid bottling line case study.
Mistakes we see
- Comparing machine prices without moulds and compressors.
- A blower faster than the filler.
- Preforms that do not match the blower.
- No dryer on the air system.
- Buying a PET blower to make jerrycans, or the reverse.
South African rules that touch a blowing line
- EPR for packaging. Plastic packaging falls under the 2020 EPR scheme, so brand owners fund collection and recycling through a producer responsibility organisation.
- Pressure equipment. Compressors and air receivers fall under the OHS Act and its pressure equipment rules, with inspections.
- Food premises. Bottlers blowing on site do so inside a food premises, which needs a Certificate of Acceptability.
- Duty and VAT. No general duty on blow moulding machines; import VAT of 15% applies on the customs value plus 10% plus duty.
Where CISH fits
CISH supplies, installs and commissions PET and HDPE blowers as part of complete filling lines from audited factories in China, with moulds, air, cooling and conveying matched to the filler, and your operators trained. For a single semi-automatic blower, a local dealer is often the better choice, and we will say so.
For who sells blow moulders and how to compare them, see blow moulding machine suppliers in South Africa.
Frequently asked questions
How much is a blow moulding machine in South Africa?
Listed prices in 2026 are about US$3,500–15,000 for a semi-automatic two-cavity PET blower, about US$20,000–95,000 for a fully automatic PET blower, and about US$13,000–50,000 for an HDPE extrusion blower, before moulds and compressors.
How much does a blow mould cost?
It depends on bottle size and cavities. Moulds are priced per design and can add a large share to the price of a small machine; ask for mould prices with every quote.
Do I need a special compressor for PET blowing?
Yes. PET blowers need high-pressure, dried and filtered air, usually from a dedicated compressor.
Is there import duty on blow moulding machines?
No general duty under 8477.30 in SARS's 2026 tariff. Import VAT of 15% applies and VAT vendors reclaim it.
Semi-automatic or fully automatic?
Semi-automatic blowers suit small bottlers and large jars. Fully automatic blowers suit continuous filling lines.
Does CISH sell single blowers?
We supply blowers as part of complete filling lines. For a single semi-automatic blower, a local dealer is usually the better route.